Table of Contents
Advertisement
Z750a_UG_AT&T_P1C_AE.book Page 22 Wednesday, September 12, 2007 8:18 AM
Voice control
By creating voice commands you can:
•
Voice dial – call someone by saying
their name
•
Activate voice dialing by saying
a "magic word"
•
Answer and reject calls when you
use a handsfree
To record a voice command to be
used for voice dialing
1
From standby select
>
the
General
> Voice dialing >
2
Select
and select a contact. If the contact
has more than one number, select the
number to add the voice command to.
3
Record a voice command such as
"John mobile".
4
Follow the instructions that appear.
Wait for the tone and say the command
to record. The voice command is played
back to you.
5
If the recording sounds OK, select
If not, select
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
22
Calling
P P reflighted by
Preflighted by
reflighted by
Menu > Settings
tab
> Voice control
Activate.
Yes > New voice command
No
and repeat steps 3 and 4
(
(
(
)
)
)
To rerecord a voice command
1
From standby select
>
the
General
> Voice dialing > Edit
2
Scroll to a command and select
> Replace
3
Wait for the tone and say the command.
Voice dialing
You can call a contact by saying the
name.
To voice dial
1
From standby press and hold down
a volume key.
2
Wait for the tone and say a recorded
name, for example "John mobile". The
name is played back to you and the
call is connected.
To make a call with a handsfree
•
Press the handsfree key.
The magic word
You can record and use a voice
command as a magic word to activate
voice dialing without pressing any keys.
Yes
.
Your handsfree must be connected to
.
your phone when using the magic word.
You should choose a long, unusual word
or phrase that can easily be distinguished
from ordinary background speech.
Bluetooth handsfree does not support this
feature.
Menu > Settings
tab
> Voice control
names.
Options
voice.
Advertisement
Chapters
Table of Contents
