Voice Control; Using Voice Commands - Sony Ericsson Z600 Manual

Z600_A6.book Page 31 Thursday, August 21, 2003 2:30 PM

Voice control

Using voice commands.

With your phone, you can use your voice to:
• Voice dial % 23 Voice dialing.
• Redial the last dialed number % 24 Voice
.
redialing
• Answer and reject calls % 26 Voice
.
answering
• Record or listen to sound recordings by using
voice commands % 32 Sound recordings
• Activate the voice control by saying a "magic
word" % 31 The magic word.
You can save approximately 50 recorded words
as voice commands in the 40 seconds available.
This also depends on what is saved in the memory
(other functions). To edit your voice commands
% 96 Editing your voice commands.
Basic operation
The magic word
You can record a magic word and use it as a voice
command to allow total handsfree access to
voice control. Instead of pressing a volume key,
you say the magic word and then one of your
recorded voice command. It is recommended to
select a long, unusual word which can easily be
distinguished from ordinary background speech.
Turn on and record the magic word
1 } }
Settings Voice Control
}
. On
2
Select a profile and press
3
Instruction appears. Press
4
Lift the phone to your ear, wait for the tone
and say the profile name. Repeat steps 3 and
4 to record voice commands for the other
profiles.
Turn off the magic word when you no longer need
total handsfree access in order to save battery power.
}
Magic Word
.
Save
OK .
31