Table of Contents
Advertisement
Changing the menu settings
Icon/item
CLOCK SET
LTR SIZE
DEMO MODE
WORLD TIME
BEEP
COMMANDER
DISPLAY
VIDEO EDIT
EDIT SET
Note on DEMO MODE
You cannot select DEMO MODE when a cassette is inserted in your VCR.
Note
The display does not appear when you connect and output through the i.LINK cable (DV
connecting cable).
In more than 5 minutes after removing the power source
The AUDIO MIX and HiFi SOUND items are returned to their default settings.
The other menu items are held in memory even when the battery is removed.
Mode
—––
z NORMAL
2
z OFF
ON
—––
z MELODY
NORMAL
OFF
z VTR2
VTR1–6
OFF
z LCD
V-OUT/LCD
—––
—––
Meaning
To reset the date or time (p. 76)
To display selected menu items in normal size
To display selected menu items at twice the normal size
To cancel the demonstration mode
To make the demonstration appear
To set the clock to the local time
Turn the SEL/PUSH EXEC dial to set a time zone
difference. The clock changes by the time difference you
set here. If you set the time difference to 0, the clock
returns to the originally set time.
To output the melody when you set the POWER switch to
ON, change the menu settings, or when an unusual
condition occurs on your VCR
To output the beep sound instead of the melody
To cancel all sound
To activate your VCR with a Remote Commander
supplied with a Sony video camera recorder
To activate your VCR with a Remote Commander
supplied with a Sony product.
For details, refer to "Playing back a tape" (p. 17).
To deactivate the Remote Commander to avoid remote
control misoperation caused by other VCR's remote
control
To show the display on the LCD screen
To show the display on the TV screen and LCD screen
To make a programme and perform video editing (p. 50)
To adjust and set the synchronicity of your VCR and the
other VCR for dubbing in edit set mode
71
Advertisement
Table of Contents
