Sony DIGITAL 8 GV-D800E Operating Instructions Manual page 48

Dubbing a tape
Using the i.LINK cable (DV connecting
cable)
Simply connect the i.LINK cable (DV connecting
cable) (not supplied) to DV IN/OUT and to DV
IN/OUT of the DV products. With digital-to-
digital connection, video and audio signals are
transmitted in digital form for high-quality
editing. You cannot dub the screen indicators.
(1) Insert a blank tape (or a tape you want to
record over) into the other (recording) VCR,
and insert the recorded tape into your
(playback) VCR.
(2) Set the input selector on the other (recording)
VCR to DV IN if it is available. For details,
refer to the operating instructions of the other
(recording) VCR.
(3) Set the POWER switch to ON.
(4) Play back the recorded tape on your
(playback) VCR.
(5) Start recording on the other (recording) VCR.
For details, refer to the operating instructions
of the other (recording) VCR.
DV IN/OUT
When you have finished dubbing a
tape
Press x on both your (playback) VCR and the
other (recording) VCR.
48
DV S VIDEO LANC
: Signal flow/
i.LINK cable (DV connecting cable) (not supplied)/
DV IN/OUT
x