Using Other Functions - Sony WALKMAN WM-GX788 Operating Instructions Manual

Using Other
Functions
Adjust the Tape Playback
Speed
You can adjust the playback
speed using SPEED CONTROL.
Turn SPEED CONTROL to:
– (slow) to play back at a slower
speed.
Center position to play back at
normal speed.
+ (fast) to play back at a faster
speed.
Note
The SPEED CONTROL works in
the playback mode only.
Recording will be made
independent of this control.
Locking the Controls
— HOLD Function
Slide the HOLD switch in the
direction of the arrow to lock the
controls of the main unit (except
SPEED CONTROL) or the
remote control.
Using the Tape Counter
The tape counter is displayed on
the main unit during playback,
recording, fast forward, rewind,
CUE, REVIEW and stop (except
when the radio is turned on).
The number will increase when
playing back the FWD side, and
decrease when playing back the
REV side. To reset the counter to
"000", press ENTER/COUNTER
RESET.
Notes
• The tape counter may show some
deviation.
• The tape counter will not be
displayed when the cassette
compartment is empty.
63