Miele ProLine CS 1018 G Operating And Installation Instructions page 10

Warning and Safety instructions

This wok must not be used in a non-stationary location (e.g. on a
ship).

Never open the casing of the wok.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.

While the wok is under warranty repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.

Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.

The wok is not intended for use with an external timer switch or a
remote control system.

If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified electrician (see
"Electrical connection" in the "Installation" chapter).

Connection to the gas supply must be carried out by a registered
gas installer. The wok may be connected to the electrical supply by a
fused plug and switched socket. If you wish to connect it to a fused
spur connection, or if the plug has been removed or the connection
cable is not supplied with a plug, the hob must be connected to the
mains supply by a registered electrical worker.
10