Electrical Connection - IKEA SKALAN Instruction Manual

ENGLISH
Rating Plate
MODEL
21552
000.000.00
Made In Italy
© Inter IKEA Systems B.V. 2021
TYPE H0000-0/0
S.N.: 00000000
The graphic above represents the rating
plate of the appliance, without serial number
which is generated dynamically during the
production process. The rating plate is
located below the surface of the casing.
Dear Customer, please apply the sticker
which you can find in the plastic bag

Electrical connection

Warning! Refer to Safety
chapters.
Connection cable
Caution! Information for
authorised installer only.
Warning!
The appliance must be earthed.
Warning!
Risk of injury from electrical
current.
• The electrical mains terminal is under
voltage.
• Make sure that the electrical mains
terminal is free of voltage.
IKEA of Sweden AB
SE - 34381 Älmhult
PI-000000-0
MOD:
G2X CXX mbar = XXkW
G3X CXX mbar = XXXg/h
Max Power = 6W
PNC. 000000000 00
220-240 V
21
ZO
0476
~
50-60 Hz
attached to the hob packaging. As a result, in
case you need our assistance, the After Sales
Service Provider can identify precisely your
hob. Thank you for your help.
• Loose and inappropriate plug and socket
connections. May overheat the terminal.
• Make sure that the clamping connections
are installed correctly.
• Secure the cable with the strain relief
clamp.
Before connecting, check that the nominal
voltage of the appliance stated on the rating
plate, corresponds to the available supply
voltage. Also, check the power rating of the
appliance and make sure that the wire is
suitably sized to suit the appliance power
rating. Refer to the Technical data chapter.
The rating plate is located below the surface
of the casing.
The appliance is supplied with a connection
cable. The cable must be provided with a
proper plug, which supports the load
15
00000000000000000