MDR-Z1000
50 mm Polymer Film Diaphragm
Rigid, yet responsive Liquid Crystal Polymer Film diaphragms provide the needed rigidity and internal
loss for balanced and highly accurate sound reproduction time and again...
HD driver
Specially-engineered High Definition driver units in concert with Oxygen-free copper wound voice coils
and high-energy neodymium magnets (360 kJ/m³) provide for ultra-wideband (5 Hz - 80 kHz) audio
performance-smooth lows, rich mids, and extended highs.
Magnesium Housing
Built for precision sound engineering, the magnesium housing provides significant strength with low
mass, greatly reducing unwanted vibration. The result is smooth bass response and clear mid-high
range sound reproduction.
Comfortable silence
Newly-developed noise isolating ear pads use pressure relieving urethane foam to cover the entire ear
for not only an outstanding fit, but reduced ambient noise.
In the studio or on the go!
2 detachable headphone cables: 3 m and 1.2 m in length, provide for minimal signal loss and ultimate
performance!
Power Input
Resists high-power input, up to 4,000 mW.
Specifications
Audio
Driver Unit
Frequency Response
Impedance
Sensitivity (db)
General
Case Type
Design
Headband
Magnet
Plug
Type of Use
Hardware
Cord
Headphone Type
50 mm, dome type (HD, OFC Voice Coil) Liquid Crystal Polymer Diaphragm
5 - 80,000 Hz
24 ohms at 1 kHz
108 dB/mW
Carrying Pouch
Over-the-head, Monitor
Wide, Adjustable, Single, folding ear cups
High-energy Neodymium (360 kJ/m³)
Gold-plated, straight stereo UniMatch® plug with fixed mini plug and detachable phone plug, 3.5 mm stereo mini jack;
UniMatch® adapter
Portable, Home, Studio
Oxygen-Free Copper; Single-sided; 7N-OFC Litz cord adopted, detachable
Closed supra-aural, Dynamic