Pc System Requirements; Pst User Interface Overview - Kohler Decision-Maker 1 Manual

Features
D
Automatic configuration to each generator set when
communication is established.
D
Read/write access to all of a generator set's
programmable parameters and features.
D
Display of each parameter's default, minimum, and
maximum values.
D
Diagnostics utilizing automatic refresh of the
generator set's status.
D
Saving and reloading generator set setup information
to and from a file for reuse.
D
Single button read for acquiring current parameter
values.
D
Single button write to program a generator set with
previously saved setup values.
D
Engine speed monitoring via a chart recorder to aid in
governor tuning.
D
Saving chart recorder data to a Microsoftr Excel
compatible file.
D
Help information on each of the governor's
parameters.
D
Help information on using the PST.

10.5.7 PC System Requirements

D
100% IBMr PC compatible with a 133 MHz or higher
Pentiumr compatible CPU.
D
Microsoft Windowsr
Windows NTr Workstation Version 4.0, Windowsr
2000, or Windows XPr operating system.
D
Display resolution with SVGA (800 x 600) or higher.
D
CD-ROM drive and minimum of 4 MB hard drive
space for installation.
D
One 9-pin RS-232 DB9M serial port.
D
PCs using USB ports will require a serial adapter.
D
Stable power supply. A laptop system with a fully
charged battery or desktop system running with a
battery backup system is recommended.
Pentiumr is a registered trademark of Intel Corporation.
IBMr is a registered trademark of International Business Machines Corporation.
Microsoftr, Windowsr, and Windows NTr are registered trademarks of Microsoft Corporation.
198 Section 10 Governor Adjustments
98SE (second edition),

10.5.8 PST User Interface Overview

The PST for generator set applications has two main
display modes—Table View and Chart View. Table view
is the PST default setting.
Table View
In the table view, the user can perform the following
items:
D
View the current values for all user-programmable
parameters in the Parameter Setup panel's table.
D
Edit a parameter's value by double clicking on a cell in
the Value column of the table.
D
Left click Read All to refresh the values in the table
shown on the Parameter Setup panel.
D
Left click Write All to transmit setup values to the
governor controller.
D
Left click View Status to display read only parameters
in the View Status panel.
D
Left click View Chart to set the display mode to Chart
View.
Chart View
In the chart view, the user can perform the following
items:
D
View the current values for all user-programmable
parameters in the Parameter Setup panel's table.
D
Edit a parameter value related to governor tuning.
These same parameters are also on the main
parameter setup table.
D
Left click Data File to open a file for saving chart
recorder data.
D
Left click Data Reset to start data collection to the
open file at the beginning.
D
Left click Pause Chart to stop the chart recorder,
which also stops writing data to the file. Left click
Continue to start the chart recorder function.
D
Adjust the horizontal and vertical settings for the chart
recorder.
D
Left click View Table to set the display mode back to
Table View.
TP-6356 4/12