Changing A Fuse - CITROEN C 3 2020 Handbook

In the event of a breakdown
Courtesy lamp with LEDs
For the replacement of LEDs, contact a
CITROËN dealer or a qualified workshop.
Boot (W5W)
► Unclip the unit by pushing the base from
behind.
► Pull the bulb out and replace it.
► Put the unit back in place.

Changing a fuse

Access to tooling
The extraction tweezers are fitted to the back of
the dashboard fusebox cover.
124
► Unclip the cover by pulling at the top left, then
right.
► Disengage the cover completely and turn it
over.
► Remove the tweezers from the back of the
cover.
The extraction tweezers are fitted to the back of
the dashboard fusebox cover.
► Open the glove box lid.
► Unclip the fusebox protection cover.
► Disengage the cover completely and turn it
over.
► Remove the tweezers from the back of the
cover.
Changing a fuse
Before changing a fuse:
► Identify the cause of the fault and fix it.
► Stop all power consumption.
► Immobilise the vehicle and switch the ignition
off.
► Identify the defective fuse using the current
allocation tables and diagrams.
To replace a fuse, it is essential to:
► Use the special tweezers to extract the fuse
from its housing and check the condition of its
filament.
► Always replace the failed fuse with a fuse of
the same rating (same colour); use of a different
rating may cause malfunctions - risk of fire!
If the fault recurs after replacing a fuse, have the
electrical system checked by a CITROËN dealer
or a qualified workshop.
The fuse allocation tables and the
corresponding diagrams are available
from a CITROËN dealer or from a qualified
workshop.
The replacement of a fuse not shown in
the allocation tables may cause a serious
malfunction of your vehicle. Contact a
CITROËN dealer or a qualified workshop.