Table of Contents
Advertisement
Driving
• With the Sport programme for a more
dynamic driving style.
– Manual operation for sequential changing of
the gears by the driver.
Gear selector module
1.
Sport programme
P.
Parking
– Vehicle immobilised, parking brake
applied or released.
– Starting the engine.
R.
Reverse gear
– Reversing manoeuvres, vehicle
stationary, engine at idle.
N.
Neutral
– Vehicle immobilised, parking brake
applied.
– Starting the engine.
D.
Automatic operation
M. + / -
Manual operation
► To move up / down through the
gears, move backwards / forwards.
76
Information displayed on
the instrument panel
When a position is selected in the grate with the
gear selector, the corresponding indicator lamp
lights up on the instrument panel.
P.
Park
R.
Reverse
N.
Neutral
D.
Drive (automatic operation)
S.
Sport programme
1...6.
Gear engaged during manual operation
-.
Instruction not processed in manual
operation
Foot on the brake
► Depress the brake pedal when this
warning lamp is displayed on the
instrument panel (e.g. when starting the engine).
Starting the vehicle
► With your foot on the brake pedal,
select position P or N.
► Start the engine.
If the conditions are not met, you will hear an
audible signal, accompanied by the display of a
message.
► With the engine running, press the brake
pedal.
► Release the parking brake, unless it is
programmed to automatic mode.
► Select position R, D or M.
► Gradually release the brake pedal.
The vehicle moves off immediately.
If position N is selected inadvertently
while driving, allow the engine to return
to idle, then select position D to accelerate.
When the engine is running at idle with
the brakes released, if position R, D or M
is selected, the vehicle moves even without
the accelerator being pressed.
Never leave children unattended in the
vehicle when the engine is running.
When carrying out maintenance with the
engine running, apply the parking brake and
select position P.
Automatic operation
► Select position D for automatic changing of
the six gears.
The gearbox then operates in auto-adaptive
mode, without any intervention on the part of the
driver. It continuously selects the most suitable
gear according to the driving style, the road
profile and the load in the vehicle.
For maximum acceleration without touching the
selector, press the accelerator fully down (kick-
down). The gearbox changes down automatically
or holds the gear selected until the maximum
engine speed is reached.
When braking, the gearbox changes down
automatically to provide effective engine braking.
Advertisement
Table of Contents
