Setting Ethernet By Diagnostic Tool - AMT Datasouth Fastmark M9 Plus User Manual

5.3 Setting Ethernet by Diagnostic Tool

The Diagnostic Utility is enclosed in the CD disk \ Utilities directory. Users can use Diagnostic Tool to setup the
Ethernet by RS-232, USB and Ethernet interfaces. The following contents will instruct users how to configure the
Ethernet by these three interfaces.
5.3.1 Using USB interface to setup Ethernet interface
1. Connect the printer and computer with a USB cable.
2. Turn on the printer power switch.
3. Start the Diagnostic Utility by double clicking on the
4. The Diagnostic Utility default interface setting is USB interface. If a USB cable is connected to
the printer, no other settings need to be changed in the interface field.
5. Click on the "Ethernet Setup" button from "Printer Function" group in Printer Configuration tab to setup
the IP address, subnet mask and gateway for the internal Ethernet.
- 33 -
icon.