Table of Contents
Advertisement
Safety precautions
If the product is used in a manner not specified by this instruction manual, the safety of the user may be imperiled. In
addition, the product may also be damaged. Always use the product according to this instruction manual.
Installation
Do not to block the air vents of DP2-AOU.
WARNING
DP2-AOU is equipped with a ventilation fan. Be careful not to block the air vents. Install DP2-AOU away from
the obstacles such as walls, etc. by 10 cm or more to get the sufficient air.
Using DP2-AOU keeping the air vents closed will cause malfunction or failure. If any foreign substance enters
from the air vents, the fan may be damaged.
Prevention of electric shock
· Never disassemble any part of this product.
WARNING
It could cause electric shock or failure of the product.
· Do not touch the product with wet hands.
In particular, if you touch the main switch of the power unit or the power cord with wet hands, electric shock,
ignition or failure of the product may be caused.
· Do not bend, pull or tie the power cord or cables in a bundle.
Otherwise they could be damaged, causing a fire or an electric shock.
· Keep the power cord and cables well away from the lamp housing.
If the power cord and cables contact a hot area of the lamp housing, they could melt and cause electric
shock.
· Do not insert any tools or metal fragments in the air vents of the device.
The electric shock or failure of the product may be caused.
Electric safety
· Always use the power cord provided by Olympus.
CAUTION
If the proper AC adapter and the power cord are not used, our intended electric safety and EMC
(Electromagnetic Compatibility) performance of the product cannot be assured. If no power cord is provided,
please select the proper power cord by referring to the section "Proper selection of the power cord" at the end
of this instruction manual.
· Always connect the ground terminal.
Connect the ground terminal of the power cord and that of the power outlet.
If the product is not grounded, our intended electric safety and EMC performance of the product cannot be
assured.
· Do not use the product in close proximity to the sources of strong electromagnetic radiation.
Proper operation may be interfered. The electromagnetic environment should be evaluated prior to operation
of the product.
· Disconnect the power cord in case of emergency.
In case of emergency, disconnect the power cord from the power cord connector on the product or from the
power outlet.
Install the product at the location where you can reach the power cord connector or the power outlet at hand
to disconnect the power cord quickly.
· Do not connect or disconnect the power cord, cables or units while the power is ON.
· Insert the cables completely to the end of the connector.
Before pressing the main switch, make sure that the cable that connects DP2-AOU to each unit is inserted
completely to the end of the connector.
DP23-AOU/DP28-AOU
3
Advertisement
Table of Contents
