Disassembly Of Motor P.c.b., Bridge 1 P.c.b. & Position Switch P.c.b - Panasonic SC-HC20GA Service Manual

Step 5 : Detach 6P wire at the connector (P101) on Main
P.C.B..
Step 6 : Remove Front Cabinet Unit.
9.14. Disassembly of Motor P.C.B.,
Bridge 1 P.C.B. & Position
Switch P.C.B.
• Refer to "Disassembly of Stand Unit"
• Refer to "Disassembly of Net Frame Unit"
• Refer to "Disassembly of Front Cabinet unit"
Step 1 : Remove 2 screws.
Step 2 : Lift up Motor Assembly.
Step 3 : Remove 1 screw.
Step 4 : Remove Slider P.C.B..
39