Network Side Connector - Toshiba DeviceNet nv Series Instruction Manual

Chapter 3 Install and Wiring

Network side connector

3.5.1
The DN611B uses a plug connector (open type), and the DN611B comes with the network side connector on
the right in Figure 3-1.
The connector on the left side of Figure 3-1, which can be purchased separately, has 2 rows (upper and lower
rows) of holes for inserting cables, so that the DN611B can be connected in the middle of a network daisy
chain connection. The connector on the right side of the figure has a single row of holes for inserting cables,
like connecting the DN611B to the end of the network. Use the DN611B depending on where you connect it to
the network.
Connect the DeviceNet cable to DN611B in the following order.
(1) Connect the DeviceNet cable to the network connector and firmly fix it.
(2) Plug the network connector into the device connector on the DN611B front panel.
Phoenix Contact
MSTB 2,5/ 5-ST-5,08
Phoenix Contact
TMSTBP 2,5/ 5-ST-5,08
Figure 3-1 Network side connector
26
6F8C1686