Table of Contents
Advertisement
200
Vehicle care
3. Ensure the jack is correctly
positioned under the relevant
vehicle jacking point.
Some versions have sill
panellings with covered vehicle
Downloaded from
ManualsNet.com
jacking points: first pull out the
cover at the respective jacking
point before positioning the jack.
4. Set the jack to the necessary
height. Position it directly below
the jacking point in a manner that
prevents it from slipping.
search engine
Attach jack handle and with the
jack correctly aligned rotate
handle until wheel is clear of the
ground.
5. Unscrew the wheel bolts.
6. Change the wheel.
7. Screw on the wheel bolts.
8. Lower vehicle.
9. Install the wheel wrench ensuring
that it locates securely and tighten
each bolt in a crosswise
sequence. Tightening torque is
110 Nm.
10. Align the valve hole in the wheel
cover of the steel wheel with the
tyre valve before installing.
Advertisement
Chapters
Table of Contents
