Opel ADAM 2016 Owner's Manual page 201

● Do not start the vehicle when it is
raised on the jack.
● Before screwing in the wheel
bolts, clean them and lightly coat
the taper of each wheel bolt with
commercially available grease.
9 Warning
Do not grease the thread of the
wheel bolt.
1. Steel wheels:
Pull off the wheel cover.
Alloy wheels with bolt caps
Disengage wheel bolt caps with a
screwdriver and remove. To
protect the wheel, place a soft
cloth between the screwdriver
and the alloy wheel.
Alloy wheels with centre cap
Two versions are available:
Downloaded from ManualsNet.com
1.1. Insert extractor in the open
slot of the centre cap and remove
the cap from the wheel. Vehicle
tools 3 186.
1.2. Insert extractor in the hole of
the centre cap and withdraw the
search engine
Vehicle care
cap from the wheel. Vehicle tools
3 186.
2. Install the wheel wrench ensuring
that it locates securely and loosen
each wheel bolt by half a turn.
The wheels might be protected by
locking wheel bolts. To loosen
these specific bolts, first attach
the adapter for the locking wheel
bolts onto the head of the bolt
before installing the wheel
wrench. The adapter is located in
the glovebox.
199