Opel ADAM 2016 Owner's Manual page 177

5. Insert the bulb socket into the
assembly and turn clockwise.
6. Attach light assembly into the
bumper and fix with the screw.
7. Insert cover into the bumper and
fix with the screw.
Adam Rocks
1. Disengage the small cap with a
screwdriver at the marked
position.
Downloaded from ManualsNet.com
2. Remove the cover by pulling with
fingers at the marked positions,
see arrows in the illustration.
3. Undo both screws and remove
light assembly from the bumper.
search engine
Vehicle care
4. Disengage and remove the bulb
socket by turning anticlockwise.
5. Remove bulb by turning
anticlockwise slightly and
withdrawing. Replace the bulb.
175