LG 16T90Q Series Easy Manual page 206

206
Setup and Upgrade
Set PCIE SSD Password
[Set PCIE SSD Password] is to set the password directly on the storage device separately from [Set
Supervisor Password].
TIP
Some models with built-in PCIE SSD may not support the password setting function.
For the models equipped with two storage devices, you can set a password for each device.
If passwords are set for both devices, the password input window appears twice during
the booting process. The order in which the password input windows appears is according
to the [Boot Type Order] of the [Boot] menu.
For the models equipped with two storage devices, the menu names are shown as PCIE
SSD1, PCIE SSD2, etc.
CAUTION
If you lose the password for a storage device, you cannot recover the storage device.
Please note that replacement of a storage device due to the loss of the password of the
storage device is excluded from the product warranty.
1
Execute the System Setup screen, go to [Security] > [Set PCIE SSD1 Password] using the arrow
keys and press the [Enter] key.