Page 2 Instruction/Safety Information Instruction/Safety Information Using LG Easy Guide, LG TroubleShooting LG Electronics Inc. provides LG Easy Guide (User's Guide) and LG TroubleShooting (TroubleShooting Guide) to users for their easy and convenient use of the product. Select the Start button [ ] >...
Page 3 Use, duplication, or reproduction of any part of LG Easy Guide without prior permission from LG Electronics Inc. is strictly prohibited. LG Electronics Inc. does not provide warranty for data loss. In order to minimize damage from data loss, please make backup copies of important data.
Page 4 ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Page 5 LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
Page 6 Instruction/Safety Information Manufacturer Hard drive manufacturers use a decimal definition of 1 KB = 1,000 Bytes. 100 GB Storage Device (HDD, SSD, eMMC): 100,000 MB / 1,000 Bytes = 100 Windows Windows use the binary definition of 1 KB = 1,024 Bytes. 100 GB Storage Device (HDD, SSD, eMMC): 100,000 MB / 1,024 Bytes = 97.6 GB RAM Capacity...
Page 7: Important Safety Precautions
Instruction/Safety Information Important Safety Precautions Please use the machine in the proper environment to extend the machine's lifespan. Use the machine in a safe and stable place. The warranty does not cover any damage resulting from reckless use or use in undesirable environments.
Page 8 Instruction/Safety Information Product Installation/Usage Precautions CAUTION Place the machine in a safe place so it does not fall. If dropped, the machine may be damaged or cause an injury. Use the product in a clean, dust-free environment. Otherwise, the system may not function properly. Do not place any objects within 6 inches of the PC.
Page 9 Instruction/Safety Information Ensure the power is off before shutting the LCD. The product may catch fire, be broken or deformed due to temperature rise. Do not impose excessive force on the LCD screen or drop it. You may break the LCD glass panel. Do not lean the LCD screen backward too much.
Page 10 Do not use the machine when the memory cover is open. It may damage the machine. Please use parts certified by LG Electronics Inc. Otherwise, a fire or product damage may occur. If there is a problem with peripheral devices, contact the device manufacturer.
Page 11 Instruction/Safety Information WARNING Dispose of the desiccating agent and plastic wrap properly. The desiccating agent and plastic wrap may cause suffocation. Do not use the machine in damp places like a laundry room or bathroom. Moisture may cause a glitch or electric shock. Please use the machine within the appropriate temperature range (50 °F to 95 °F) and humidity range (20% RH to 80% RH).
Page 12 Instruction/Safety Information Do not put your finger or an object into PC ports. An injury or electric shock may occur. Ask one of our engineers to run a safety check after your computer has been repaired. Otherwise, an electric shock or fire may occur. For minors, we recommend a program that blocks access to illegal or pornographic web sites.
Page 13 Instruction/Safety Information If you dissemble the PC, connect the power after reassembly is done. There is a risk of electric shock or product damage, if you touch the disassembled PC. Do not put in metal items such as coins, hair pin or other irons or inflammables such as paper or matches.
Page 14 Instruction/Safety Information WARNING During air travel, follow the directions of flight attendants. Using the PC during flight may cause an aircraft accident. When leaving the machine in a car, avoid exposure to direct sunlight. The product may get deformed or catch on fire due to a temperature rise. Do not put any heavy object on the power cable and AC adapter, and avoid damage from impacts.
Page 15 Do not throw or disassemble the battery. The resulting damage may cause an injury, explosion, or fire. Use batteries certified and acknowledged by LG Electronics Inc. Otherwise, an explosion or fire may occur. Prevent the battery from being in contact with any metallic object like a car ignition key or a paper clip.
Page 16 Instruction/Safety Information It may explode or cause a fire. Disposal methods may differ by country and region. Dispose of spent batteries in accordance with the laws and safety rules of the country and region you reside in. If you find leakage or smell bad odor from the battery, remove the battery and contact the local service center.
Page 17 Instruction/Safety Information Connect the power plug properly by pushing it to the end. If a contact failure occurs, it may cause product damage or fire. Do not bend the power cable for AC adapter too much or get stamped by a sharp object.
Page 18 Instruction/Safety Information Always keep the AC adapter and power outlet clean. A fire may occur. Keep children and pets from damaging the power cord. It may cause a fire or an electric shock. Disconnect the PC completely before cleaning it. Otherwise, an electric shock or impairment may occur.
Page 19 The manufacturer is not responsible for any data loss. We do not refund or replace a product that malfunctions due to the installation or use of an operating system other than the one provided by LG Electronics Inc. Some software applications may not work properly in other operating systems.
Page 20 ENERGY STAR ® ENERGY STAR ® ENERGY STAR ® Specifications LG Electronics Inc. participates in ENERGY STAR and the energy efficiency of this ® product complies with the specifications of ENERGY STAR ® ENERGY STAR ® is a set of regulations that encourages manufacturers of electronic devices to create more energy efficient products.
Page 21 Instruction/Safety Information Turn off the display: Turns off the screen when you don't use the PC for a set period of time. Put the computer to sleep: Switches to the Sleep mode when you don't use the PC for a set period of time.
Page 22: Regulatory Notices
Regulatory Notices UK Notice ENGLISH Hereby, LG Electronics declares that the radio equipment type PC is in compliance with the relevant statutory requirements. The full text of the UK declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc# The use of the 5150-5350 MHz and 5945-6425 MHz band (if applicable) is restricted to indoor use only.
Page 23 Instruction/Safety Information Por la presente, LG Electronics declara que el tipo de equipo de radio ordenador cumple con la Directiva 2014/53/UE. El texto completo de la declaración de conformidad con la legislación de la Unión Europea está disponible en el siguiente sitio web: http://www.lg.com/global/support/cedoc/cedoc#...
Page 24 Instruction/Safety Information Con la presente, LG Electronics dichiara che l apparecchiatura radio tipo PC è conforme con la Direttiva 2014/53/UE. Il testo completo della Dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: http://www.lg.com/global/support/cedoc/cedoc# Luso della banda 5.150-5.350 MHz e 5.945-6.425 MHz (se applicabile) è limitata al solo uso in ambienti interni.
Page 25 (SE), Irlanda de Nord (UK(NI)), Elve ia (CH), Islanda (IS), Liechtenstein (LI) i Norvegia (NO). FRANÇAIS Par la présente, LG Electronics déclare que léquipement radio de type PC est en conformité avec la Directive 2014/53/EU. Le texte intégral de la déclaration de conformité UE est disponible à l adresse suivante: http://www.lg.com/global/support/cedoc/cedoc#...
Page 26 External Power Supply Information Manufacturer s name or trade mark, Manufacturer; LG Electronics Inc. commercial registration number and Commercial registration number; 107-86- address 14075 Address; LG Twin Towers, 128 Yeoui-daero, Yeongdeungpo-gu, Seoul, 07336, Korea ADT-65DSU-D03-2 Model identifier 100-240 Input voltage (V) 50-60 Input AC frequency (Hz) 15.0...
Page 27 Instruction/Safety Information German: Modellkennung Hungarian: Modellazonosító Italian: Identificativo del modello Polish: Identyfikator modelu Protuguese: Identificador do modelo Romanian: Identificator de model Spanish: Identificador del modelo Swedish: Modellbeteckning Norwegian: Modellidentifikator English: Input voltage Danish: Indgangsspænding Dutch: Voedingsspanning Finnish: Ottojännite French: Tension d entrée German: Eingangsspannung Hungarian: Bemen feszültség Italian: Tensione di ingresso...
Page 28 Instruction/Safety Information Dutch: Uitgangsstroom Finnish: Antovirta French: Courant de sortie German: Ausgangsstrom Hungarian: Kimen áramer sség Italian: Corrente di uscita Polish: Pr d wyj ciowy Protuguese: Corrente de saída Romanian: Curent de ie ire Spanish: Intensidad de salida Swedish: Utgående ström Norwegian: Utgangsstrøm English: Output power Danish: Udgangseffekt...
Page 29 Instruction/Safety Information English: Efficiency at low load (10 %) Danish: Effektivitet ved lav belastning (10 %) Dutch: Efficiëntie bij lage belasting (10 %) Finnish: Hyötysuhde alhaisella kuormituksella (10 %) French: Rendement à faible charge (10 %) German: Effizienz bei geringer Last (10 %) Hungarian: Hatásfok alacsony (10 %-os) terhelésnél Italian: Rendimento a basso carico (10 %) Polish: Sprawno...
Page 30 Instruction/Safety Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 31 Instruction/Safety Information This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Page 32 Instruction/Safety Information 2) Lappareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d en compromettre le fonctionnement. Exposition aux radiofréquences FCC/IC Selon les preuves scientifiques disponibles, aucun problème de santé n est associé à l utilisation d appareils sans fil de faible puissance.
Page 33 Instruction/Safety Information The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields from 0 Hz to 300 GHz. The SAR limit recommended by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) is 2 W/kg averaged over 10g of tissue.
Page 34 Instruction/Safety Information 3 47 6 (02) 2627-2788 Japan 5.2GHz (W52) 5.2GHz 5.3GHz (W52/W53) Wi-Fi 2.4 GHz DS-SS OFDM 40 m For Motion remote (Bluetooth) 2.4 GHz FH-SS 10 m...
Page 35 Instruction/Safety Information LG Electronics Japan 0120-813-023 0570-200-980 TEL : 03-5675-7323 FAX : 03-5675-7335 09:00~18:00 ( V C C I - B : Intel ® AX211D2W...
Page 36 Instruction/Safety Information http://www.jbrc.com CIS countries only ( /Additional information)
Page 37 Instruction/Safety Information (WEEE). : MM/YYYY, , YYYY - ENGLISH Purpose The device is intended for data processing and visual display of textual/graphical information. Rules of transportation and storage The product should be transported and stored strictly in accordance with the marking on the package.
Page 38 YYYY - year of manufacture. Information on the certification of our devices, the data on the number of the certificate and its validity period, you can contact customer support LG free phone. ENGLISH Name LG Electronics Nanjing New Technology Co., Ltd.
Page 39 GREEN MARK (for Japan) JIS C0950:2008) J Moss J-Moss PBB PBDE http://www.lg.com/jp/eco/j-moss SAFETY REGULATION NOTICE Battery ENGLISH Risk of fire or explosion if the battery is replaced by an incorrect type. Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types).
Page 40 Instruction/Safety Information Do not store or transport at pressures lower than 11.6 kPa (1.68 psi) and at above 15 000 m (49212.5 feet) altitude. ESPAÑOL Existe riesgo de explosión si se cambia la batería por una de un tipo incorrecto. Sustitución de la batería por un tipo de batería incorrecto que puede anular los mecanismos de seguridad (por ejemplo, en el caso de algunos tipo de batería de litio).
Page 41 Instruction/Safety Information Rischio di incendio o esplosione se la batteria viene sostituita con una di tipo non corretto. La sostituzione della batteria con una di tipo non corretto può compromettere la sicurezza (ad esempio nel caso di alcune batterie al litio). Lo smaltimento delle batterie nel fuoco o in un forno caldo, o lo schiacciamento meccanico o il taglio delle batterie può...
Page 42 Instruction/Safety Information Een batterij in een vuur of een hete oven werpen of een batterij verpletteren of snijden, kan leiden tot een explosie. Een batterij achterlaten in een omgeving met een extreem hoge temperatuur, kan leiden tot een explosie of het lekken van brandbare vloeistof of gas. Een batterij blootstellen aan een extreem lage luchtdruk, kan leiden tot een explosie of het lekken van brandbare vloeistof of gas.
Page 43 Instruction/Safety Information Une batterie soumise à une pression d air extrêmement basse qui peut entraîner une explosion ou une fuite de liquide ou de gaz inflammable. Ne pas stocker ni transporter à des pressions inférieures à 11,6 kPa et à plus de 15 000 m d altitude.
Page 44 Instruction/Safety Information Information for Environmental Preservation LGE announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects.
Page 45 De nombreux composants sont réutilisés et recyclés, et les matières dangereuses, ainsi que les métaux lourds, sont traités selon un procédé écologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un l un de nos représentants.
Page 46 La LGE ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente più pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attività...
Page 47 Instruction/Safety Information Información para la conservación medioambiental LGE presentó la 'Declaración para un entorno más limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaración es la base que nos ha permitido llevar a cabo tareas que respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, económicos y medioambientales.
Page 48 NEDERLANDS Informatie met betrekking tot het behoud van het milieu LGE publiceerde in 1994 de LG Declaration for a Cleaner Environment (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden.
Page 49 Instruction/Safety Information 1994 « », http://www.lg.com/global/sustainability/environment/take-back-recycling.jsp WEEE ENGLISH (UK, Ireland) Disposal of your old appliance This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream.
Page 50 You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorised WEEE collection point. For the most up to date information for your country please see www.lg.com/global/recycling (Bulgaria) : www.lg.com/...
Page 51 Spot ebi m ete zanést bu do obchodu, kde jste ho zakoupili nebo se obrátit na místní správu komunálních odpad , kde získáte podrobné informace o autorizovaném sb rném míst WEEE. Pro poslední aktuální informace z va í zem si prosím prostudujte web www.lg.com/global/recycling DANSK (Denmark)
Page 52 U kunt uw apparaat meenemen naar de winkel waar u het product heeft gekocht, of u kunt contact opnemen met uw plaatselijke afvalverwerking instantie voor de gegevens van uw dichtstbijzijnde geautoriseerde WEEE-verzamelpunt. Voor de meest recente informatie voor uw land verwijzen wij u naar www.lg.com/global/recycling DEUTSCH (Germany) Entsorgung Ihrer Altgeräte Das durchgestrichene Symbol eines fahrbaren Abfallbehälters weist darauf hin, dass Elektro- und...
Page 53 Daher empfehlen wir Ihnen sich für weitere Informationen an Ihren Händler zu wenden. LG Electronic Deutschland GmbH ist ordnungsgemäß als Hersteller in Deutschland registriert. Damit trägt LG deutschlandweit zur Sammlung von Elektro- und Elektronik-Altgeräten bei, die Sie in kommunalen Getrenntsammelstellen abgeben. Die aktuellsten Informationen finden Sie unter: www.lg.com/global/recycling oder https://www.lg.com/de/support/altgeraete-rueckgabe.
Page 54 Du kan bringe apparatet enten til butikken der du kjøpte produktet, eller ta kontakt med den lokale myndighetens avfallskontor for informasjon om nærmeste autoriserte innsamlingspunkt for el- avfall (WEEE-avfall). For den mest oppdaterte informasjonen for ditt land, gå til www.lg.com/global/ recycling.
Page 55 WEEE. Aby uzyska aktualne informacje z zakresu gospodarki odpadami obowi zuj cej w danym kraju, nale y odwiedzi stron http://www.lg.com/global/sustainability/environment/take-back-recycling/global- network-europe (plik PDF : For more information about how to recycle LG products in your country . PORTUGUÊS (Portugal) Eliminação do seu aparelho usado...
Page 56 Svojo napravo lahko odnesete v trgovino, kjer ste jo kupili, ali pa se glede podrobnosti o najbli jem poobla enem zbirnem mestu za odpadno elektri no in elektronsko opremo obrnite na lokalno komunalno podjetje. Za najnovej e informacije za svojo dr avo si oglejte www.lg.com/global/ recycling.
Page 57 Puede llevar el aparato a cualquiera de los centros autorizados para su recogida. Para obtener la información más actualizada para su país por favor visite www.lg.com/global/recycling SVENSKA (Sweden) Bortskaffning av den gamla produkten Den överkorsade soptunnesymbolen indikerar att elektroniskt och elektriskt avfall (WEEE) ska...
Page 58 Bu i areti içeren ürünler tehlikeli madde içerebilir. Ürünler içerisindeki tehlikeli maddeler çevre kirlenmesine veya yaralanma/ölüme sebebiyet verebilir. AEEE Yönetmeli ine Uygundur. Eski ürününüzün imhas hakk nda daha fazla bilgi için lütfen belediyeniz ya da ürünü ald n z ma aza ile ileti ime geçiniz. (www.lg.com/global/recycling) (Ukraine) (WEEE) (WEEE).
Page 59 EEIA sav k anas punktu. Jaun ko inform ciju par savu valsti skatiet vietn www.lg.com/global/recycling. LIETUVI K. (Lithuanian)
Page 60 Toll Free No. 1800-315-9999 / 1800-180-9999 for details. All collection centre and pick up facilities are done by third parties whith LG Electronics India Pvt. Ltd. Merely as a facilitator. For more detailed information, please visit : http://www.lge.com/in .
Page 61 Instruction/Safety Information LG Take-back & Recycling Policy (For USA) LG Electronics offers a customized e-waste take-back & recycling service that meets local needs and requirements in the countries where e-waste regulations are in place, and also provides product take- back & recycling service voluntarily in some regions. LG Electronics evaluates products recyclability at the design step selectively, with the goal of improving recyclability where practicable.
Page 62 à saúde humana. Programa Coleta Inteligente A LG criou o Programa Coleta Inteligente, para facilitar e viabilizar o descarte ambientalmente adequado de produtos, pilhas e baterias. Através do Programa Coleta Inteligente, a LG disponibiliza pontos de coleta em localidades diversas, incluindo assistências técnicas autorizadas da LG Electronics.
Page 63 For more detail information about disposal of your old batteries, please contact your city office, waste disposal service or the shop where you purchased the product. Also You can contact our LG Support Representative Call center from below Link https://www.lg. com/sa_en/support/contact/telephone https://www.lg.com/sa_en/support/contact/telephone...
Page 64 För mer detaljerad information om hanteringen av dina gamla batterier/ackumulatorer ber vi dig ta kontakt med myndigheterna där du bor, eller med affären där du köpt din apparat. (http://www.lg. com/global/sustainability/environment/take-back-recycling/global-network-europe) NEDERLANDS...
Page 65 Folgen für Mensch, Tier und Umwelt. Beim Wunsch nach ausführlicheren Informationen über die Entsorgung Ihrer alten Batterien/Akkus wenden Sie sich bitte an Ihre Stadt-/ oder Gemeindeverwaltung, die für Sie zuständige Abfallbehörde oder das Geschäft, in dem Sie das Produkt gekauft haben. (http://www.lg.com/ global/sustainability/environment/take-back-recycling/global-network-europe) DANSK Symbolet kan være kombineret med de kemiske symboler for kviksølv (Hg), kadmium (Cd) eller bly...
Page 66 Para informações mais detalhadas sobre a eliminação das suas baterias/acumuladores, contacte por favor os serviços de reciclagem locais, ou o local onde adquiriu o produto. (http://www.lg.com/ global/sustainability/environment/take-back-recycling/global-network-europe) SLOVEN INA...
Page 67 Správna likvidácia va ich starých batérií/akumulátorov pomô e zabráni negatívnym následkom na ivotné prostredie, zdravotný stav udí a zvierat. Viac informácií o likvidácii va ich starých batérií/akumulátorov vám poskytne vá mestský úrad, firma na likvidáciu odpadu alebo obchod, kde ste si výrobok kúpili. (http://www.lg.com/global/ sustainability/environment/take-back-recycling/global-network-europe) ESKY Tento symbol m e být kombinován s chemickou zna kou rtuti (Hg), kadmia (Cd) nebo olova (Pb),...
Page 68 W celu uzyskania wi cej informacji na temat utylizacji zu ytych baterii/akumulatorów nale y skontaktowa si z lokalnym urz dem miasta, zak adem us ug komunalnych lub sklepem, w którym produkt zosta zakupiony. (http://www.lg.com/global/sustainability/environment/take-back- recycling/global-network-europe) EESTI Seda sümbolit võbeda (Hg), kaadmiumi (Cd) või plii (Pb) keemiline tähis, kui patarei/aku sisaldab üle...
Page 69 önleyecektir. Kullan lm pillerinizin/akümülatörlerinizin at lmas ile ilgili olarak, bulundu unuz yerdeki belediye, çöp at m hizmeti veren kurulu lara veya ürünü sat n ald n z yerlere ba vurabilirsiniz. (http://www.lg. com/global/sustainability/environment/take-back-recycling/global-network-europe)
Page 70 Hvis du vil ha mer informasjon om hvordan du bør håndtere brukte batterier/akkumulatorer som avfall, kan du ta kontakt med lokale myndigheter, renovasjonstjenesten på stedet eller butikken der du kjøpte produktet. (http://www.lg.com/global/sustainability/environment/take-back-recycling/ global-network-europe) SRPSKI Simbol mo e biti kombinovan sa hemijskim simbolima za ivu (Hg), kadmijum (Cd) ili olovo (Pb) ako baterija sadr i vi e od 0,0005% ive, 0,002% kadmijuma ili 0,004% olova.
Page 71 Ispravnim odlaganjem starih baterija/akumulatora spre avate potencijalne negativne efekte na okolinu, zdravlje ivotinja i ljudi. Dodatne informacije o odlaganju starih baterija/akumulatora zatra ite od gradske uprave, komunalnog preduze a ili prodavnice u kojoj ste kupili proizvod. (http://www.lg.com/global/ sustainability/environment/take-back-recycling/global-network-europe) (Hg), (Cd)
Page 72 Pour éviter d endommager le produit et pour leur propre sécurité, les utilisateurs ne doivent pas tenter de retirer la batterie et ils doivent demander conseil à l aide en ligne de LG Service ou à d autres prestataires de services indépendants.
Page 73 Para evitar daños en el producto, y por su propia seguridad, el usuario no debe intentar retirar la batería, debe ponerse en contacto con la Línea de Ayuda de Servicios de LG, o con otros proveedores de servicios independientes para su asesoramiento.
Page 74 In het geval dat dit product een binnen het product opgenomen batterij bevat, die niet gemakkelijk kan worden verwijderd door eindgebruikers, raadt LG aan om de batterij alleen door gekwalificeerde professionals te laten verwijderen, zijnde voor vervanging of voor recycling aan het einde van de levensduur van dit product.
Page 75 V p ípad , e tento výrobek obsahuje v produktu integrovanou baterii, kterou koncový u ivatel nem e snadno odstranit, je doporu eno spole ností LG, aby bu p i vým n , nebo za ú elem recyklace na konci ivotnosti tohoto produktu, bylo vyjmutí baterie ponecháno pouze kvalifikovaným odborník m.
Page 76 Eliminarea bateriilor uzate i acumulatorilor uza i (DOAR în cazul produselor cu baterie încorporat ) În cazul în care bateria este încorporat în produs i nu poate fi îndep rtat de utilizatorul final, LG recomand ca bateria s fie îndep rtat doar de c tre un personal calificat; bateria astfel îndep rtat trebuie înlocuit...
Page 77 LG at kun kvalifisert fagpersonale fjerner batteriet, enten for bytte eller for resikr ved slutten av dette produktets brukstid. For å unngå skade på produktet, og for deres egen sikkerhet, bør brukere ikke prøve å fjerne batteriet, og bør kontakte LG Service Helpline, eller andre uavhengige serviceleverandører for råd.
Page 78 Lai nenodar tu kait jumu produktam un pasarg tu sevi, lietot jiem nevajadz tu m in t iz emt akumulatoru un vajadz tu konsult ties ar LG pal dz bas dienestu vai k du neatkar gu pakalpojumu sniedz ju.
Page 79 Uklanjanje starih istro enih baterija i akumulatora (JEDINO proizvod sa ugra enom baterijom) U slu aju da ovaj proizvod sadr i bateriju koju krajnji korisnik ne mo e jednostavno da izvadi, LG preporu uje da to uradi samo kvalifikovana osoba, bilo da se radi o zameni ili recikliranju baterije nakon to se istro i.
Page 80 ç kar lmas n tavsiye eder. Kullan c lar, ürünün zarar görmesini engellemek ve kendi güvenliklerini sa lamak için bataryay ç karmaya kalk mamal ve öneri konusunda LG Servis Yard m Hatt ya da di er ba ms z servis sa lay c lar ile ileti ime geçmelidir.
Page 81: Product Specifications
Instruction/Safety Information Product Specifications PC Specifications Display 16 inch IPS LCD with Pen Touch The display resolution may differ by model. Intel ® Core i7 / i5 / i3 processor The CPU differs depending on model type and cannot be replaced by the user.
Page 82 Instruction/Safety Information Power Supply and Environments Power Rating: Up to 65.0 W AC Adapter (Free Voltage) Input: AC 100 V to 240 V, 1.6 A 50 / 60 Hz Output: DC 5.0 V, 3.0 A / 9.0 V, 3.0 A / 15.0 V, 3.0 A / 20.0 V, 3.25 A Battery Lithium Ion battery...
Page 83: Using Windows
Using Windows 11 Using Windows 11 Starting Windows 11 Screen Layout The taskbar in Windows 11 has been changed so you can use Windows quickly and easily. Start Button: It can run apps installed on your PC or use user accounts, power menu, etc. Search: It can use apps, documents, and web search functions.
Page 84 Using Windows 11 Start Screen If you select the Start button [ ] on the taskbar, the Start screen will appear. Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. All apps: It shows all the apps installed on your PC. Apps pinned on the Start screen: It shows the apps pinned on the Start screen.
Page 85 Using Windows 11 Desktop Apps and Windows Apps The Desktop apps remain unchanged from the previous Windows apps, but Windows apps have been changed to include various functions. The Windows apps provide easy-to-use menus according to the window size and a variety of convenient functions such as Update and Alarm.
Page 86: Using Apps
Using Windows 11 Using Apps Running and Exiting Apps Run apps that were not pinned to the Start screen or apps that were installed on the system using the following method. Select the Start button [ ] > [All apps]. Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen.
Page 87 Using Windows 11 Select and run an app. To close the app, select the Close button [ ] at the top of the app screen. Deleting Apps It can delete apps pinned to the Start Screen or delete desired apps in [All apps]. The basic Windows apps that are required may not be deleted.
Page 88 Using Windows 11 Select the Start button [ ] and right-click the app you want to delete from the Start screen or [All apps] to select [Uninstall]. Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. When prompted to confirm the deletion, select [Uninstall] to delete the app.
Page 89 Using Windows 11 Select the Start button [ ] > [All apps]. Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. Right-click the app you want to add and then click [Pin to Start] or [More] > [Pin to taskbar].
Page 90 Using Windows 11 The app is added to the Start Screen or taskbar.
Page 91 Using Windows 11 Toggling and Adding Apps/Desktops In Windows 11, you can toggle the running apps easily and quickly, and add desktops to use them like multiple PCs. For an app that does not allow multitasking, you may be switched to the desktop where the app was executed, or you may have an error message.
Page 92 Using Windows 11 Select [New desktop] to create [Desktop 2]. In the desktop preview, press the Close button [ ] to delete the desktop and move running apps to another desktop. Select an app in the preview or desktop.
Page 93 Using Windows 11 The screen is toggled to the selected app or desktop. Using Shortcut Keys Use the shortcut keys to quickly toggle between apps and desktops. Shortcut Keys Description [Alt] + [Tab] Hold down the [Alt] key and press the [Tab] key to view the running apps in the preview.
Page 94 Using Windows 11 Using the Store You can purchase a variety of apps or get free apps from Microsoft Store. If a local account is being used, a window to switch to a Microsoft account appears while using Windows Store. Follow the instructions on the screen to switch the local account to a Microsoft account.
Page 95: Unlocking The Screen
Using Windows 11 Unlocking the Screen If the PC is not used for an extended period, it goes into a locked state. When the PC is used again, a lock screen appears for security purposes and may be unlocked by using the following method.
Page 96: Setting The Pc
Using Windows 11 Setting the PC Windows 11 supports various functions so that the user can change the PC setting easily and quickly. Using the Setting Menu Select the Start button [ ] > [Settings].
Page 97 Using Windows 11 When the Settings screen appears, select and change the settings as needed. Using the Quick Settings Quick Settings allows users to change the PC settings quickly and easily. Select [Quick Settings] on the right side of the taskbar.
Page 98 Using Windows 11 Select the desired setting from [Quick Settings] and change. Selecting the [ ] icon allows you to add/remove the Quick Settings menu. Select the [ ] icon to run the [Settings] menu.
Page 99 Using Windows 11 Windows Shutdown Option In Windows 11, you can use the Windows shutdown option by following these steps: Select the Start button [ ] > [Power] and select the desired Windows shutdown option. Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. On the Desktop screen, press [Alt] + [F4] to use the Windows shutdown option.
Page 100: Using The Pc
The internal battery should not be arbitrarily disassembled or replaced. Arbitrarily disassembling the product may void the warranty. If you need to disassemble or replace the battery, please visit the designated LG Electronics Service Center. We charge a fee for removing or replacing the battery.
Page 101 Do not leave a liquid container on the PC. The system may be short-circuited and damaged. WARNING Please use an AC adapter certified by LG Electronics Inc. Uncertified batteries may explode. It may cause a problem in battery charging or system operation.
Page 102 Using the PC CAUTION When packing or moving the product, close the LCD panel to protect it. Be careful not to pinch your fingers between the PC main body and the LCD panel. Do not rotate the LCD panel with excessive force. This may damage the hinge connecting the PC body and the LCD panel.
Page 103 Using the PC CAUTION Use batteries certified and acknowledged by LG Electronics Inc. Uncertified batteries may explode.
Page 104 Using the PC WARNING The battery may explode due to excessive heat, causing fire. For a safe and efficient use of battery, follow the below directions. Do not short-circuit the battery. Keep the battery out of reach of children. A visible swelling of the battery pack indicates a possible danger. When this occurs, contact your local vendor or service center immediately.
Page 105 The battery capacity may change due to chemical reactions during charge and discharge. LG Notebook frequently checks the charge level of its battery based on usage conditions, and then calculates and correctly indicates the actual remaining level of the battery.
Page 106: Operation Status Lamps
Using the PC Operation Status Lamps AC Adapter Lamp White: When the AC adapter is connected and charging is complete Orange: When the AC adapter is connected and is charging Off: When the AC adapter is not connected If you try to turn on the system that has entered the Hibernate mode or been turned off after a low-battery alarm, the system will not be turned on but the lamp will blink three times.
Page 107 Hot Keys are shortcut keys that can run some functions and software of the PC, and using them allows you to use the PC more easily. Fn + F1 Executes LG Smart Assistant. Fn + F2 Adjusts screen brightness (brightness decreases in 11 levels).
Page 108 Using the PC Fn + F9 Switches to the Reader Mode. Fn + F10 Mute Fn + F11 Adjust the volume (lower) Fn + F12 Adjust the volume (louder) Fn + Prt Sc Works as the Scroll Lock [Scr Lk] key. Fn + S Switches to the Sleep Mode (runs in the mode set in Windows.
Page 109: Keyboard Backlight
Each time you press the [Fn] + [F8] keys, the status changes to KBD Backlight Off, KBD Backlight Low, and then KBD Backlight High in the specified order. Select the Start button [ ] > [All apps] and run [LG Smart Assistant]. Select [Keyboard Setting] and set the keyboard lighting and its off time.
Page 110: Adjusting Screen Brightness And Volume
Using the PC Adjusting Screen Brightness and Volume LG PC allows you to use the hot keys to easily adjust the screen brightness and volume. According to the model type, a button for volume control (mute, volume up / down, DTS, etc.) may be available.
Page 111 Using the PC Locking/Unlocking Screen Rotation Select the Start button [ ] > [Settings]. Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen.
Page 112 Using the PC If you select [System] > [Display] and set [Rotation lock] to [On], the screen rotation is locked.
Page 113 Using the PC Hearing Protection Feature The product is equipped with a hearing protection feature to protect your ears from pressurized sound while using earphones or headphones. The feature is set to off by default and can be manually turned on as follows: Select the Start button [ ] >...
Page 114 Using the PC Set [Ear Protection] to [On] to activate the hearing protection feature. A warning message will be displayed if the volume is high while this feature is on.
Page 115: Using The Touchpad
Using the PC Using the Touchpad The built-in touchpad provides the same functionality as an external mouse. You can use the touchpad and USB mouse simultaneously. Touchpad Moves the cursor. Left button Use to select or execute programs. Right button Functions as the right button of a mouse in most cases.
Page 116 Using the PC The scroll function is provided as a gesture. Please refer to the Touchpad Gesture section of this document. Precautions for Using the Touchpad If you are using a touchpad, use the area marked with a red line shown below. Touching an edge or border of the touchpad may not work.
Page 117 Using the PC Double-click (Execute) Press the left button twice consecutively and release the button. (Or tap the touchpad twice.) Do this, for example, to run a program after selecting its execution file (or icon). CAUTION Notes on Using the Touchpad Do not use a sharp object such as a pen on the pad nor peel the cover.
Page 118 Using the PC Drag & Drop To drag, click and hold an icon, and move it to another location. To drop, release the dragged icon in the location you want. To move a file icon to another folder or to Recycle Bin, place the cursor (or the pointer) on the icon, press and hold the left button, and glide another finger on the touchpad until the icon reaches the aimed location.
Page 119 Using the PC Select the Start button [ ] > [Settings]. Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. Select [Bluetooth & devices] > [Mouse] > [Additional mouse settings].
Page 120 Using the PC Check [Turn on ClickLock] and select [Settings]. Set the duration of ClickLock operation.
Page 121 Using the PC Press the left button of the touchpad and release it to change the button into the pressed state. Move on the touchpad to use the drag/scroll feature. Press the left mouse button to turn off the ClickLock. Touchpad Gesture The touchpad gesture feature allows you to use Windows programs more easily by utilizing multi- touch functions.
Page 122 Using the PC Place two fingers on the touchpad and move up/down/left/right to scroll the screen. (It operates only on an app or screen which scrolling is available.) Place two fingers on the touchpad and widen or narrow them to zoom out or in.
Page 123 Using the PC Setting Touchpad You can change the touchpad features or enable/disable the gesture feature. The figures herein may differ by language selection and are subject to change without prior notice. Select the Start button [ ] > [Settings]. Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen.
Page 124 Using the PC Change the settings as needed on the [Touchpad] item.
Page 125: Using Touch Panel
Using the PC Using Touch Panel Use the touch panel for a faster and more convenient use of the PC. All gestures provided by Windows 11 can be used. For more details about the Windows 11 gestures, refer to Windows help. Basic Usage Touching Once: Touch the panel once to use as left mouse button.
Page 126 Using the PC Touching Twice: Touch the panel twice to use as double-click. Drag: After touching the start point, finger movement can be used instead of the mouse.
Page 127 Using the PC Touching Longer: Touch the panel for a longer time to use as right mouse button. Using the Touch Keyboard Right-click on the taskbar and select [Taskbar settings]. Then, set [Touch Keyboard] to [On].
Page 128 Using the PC Press the icon [ ] on the bottom right of the taskbar to display the [Keyboard] screen.
Page 129: Using Stylus Pen
Using the PC Using Stylus Pen If you use a Stylus Pen for 16T90Q model, you can perform more precise touch control than when using fingers. Name of Each Part Pen tip Performs the same function as a mouse cursor. Left mouse button Use to select or execute programs.
Page 130 Using the PC Touching Once: Touch a screen with the Stylus Pen once to use it as a left mouse click. Touching Twice: Touch a screen with the Stylus Pen twice to use it as a double click.
Page 131 Drag: Move the Stylus Pen while pressing the screen with it to use it as a mouse drag function. Setting Stylus Pen You can set the button function and sensitivity of the Stylus Pen in the [LG Pen Settings] app. Select the Start button [...
Page 132 Using the PC Change the button function and sensitivity to use the Stylus Pen. Inserting and Replacing Batteries 1.5V batteries of an AAAA size is provided with the product. Insert the batteries before using the pen as follows. If the battery level is low, the pen operation may be interrupted or the pen may not be recognized.
Page 133 Using the PC CAUTION If a battery of incorrect specifications or a rechargeable battery is used, the normal operation is not guaranteed. If the pen is not used for a long period of time, store the pen after removing the batteries. Otherwise, the battery liquid may leak and cause a failure.
Page 134 Using the PC Insert the battery in the correct +/- direction, and turn the pen cap upward to close it. When replacing the battery, remove the existing battery and insert the new battery as shown above. CAUTION Make sure that no foreign substance is caught in the screw line when detaching/attaching the pen cap.
Page 135 Using the PC Hold the pen tip with tweezer and pull it outward to remove it from the Stylus Pen. Insert a replacement pen tip to the Stylus Pen. CAUTION If you push the pen tip with excessive force or insert it in the opposite direction, it may cause a failure.
Page 136 Using the PC Connecting to External Display Connecting to the HDMI Port HDMI is a multimedia interface that can integrate and transmit video and audio signals. In some models, DTS Audio may not work when you use HDMI. Ensure the monitor power is off before connecting the external monitor to the PC. The HDMI cable may be connected when the HDMI adapter is used.
Page 137 Using the PC Connect the HDMI cable to the PC and the external device (TV, monitor) that supports HDMI. HDMI port transfers both video and audio simultaneously. Hence, there is no need for a separate audio connection. On the PC, press [Fn] + [F7] to display monitor (projector) toggling screen. Select the desired screen output.
Page 138 Using the PC Connecting to Wireless Display The wireless display feature connects the PC screen and sound to a display (TV, projector, etc.). OPTION To use the wireless display feature, the display device must support this feature. To connect to the display device that does not support wireless display, you must separately purchase a wireless display connection device.
Page 139 Using the PC Select [Connect] under the [System] > [Display] > [Multiple displays] > [Connect to a wireless display] menu. If the device search screen appears, it will search for nearby wireless display devices. Select an available device and connect the device.
Page 140 Using the PC Once the wireless display device is connected, it outputs the PC screen and its sound.
Page 141 Using the PC Connecting an External USB-C (Thunderbolt ) Device The USB-C port mounted on this product supports USB 4.0 Gen 3x2 standards. Use the USB-C port to connect USB devices or to output a screen to an external display. The names of USB versions have changed from USB 3.0 (or USB 3.1 Gen 1) and USB 3.1 (or USB 3.1 Gen 2) to USB 3.2 Gen 1x1 and USB 3.2 Gen 2x1.
Page 142 Using the PC The Thunderbolt cable is not provided with the product. Make sure that you use a certified cable. Some functions may not be available depending on the product. For more information, refer to the user manual provided with the device to be connected. Connecting two notebook PCs that support Thunderbolt Use Thunderbolt to connect two PCs easily and quickly and send and receive data between them.
Page 143 Using the PC Enable [Change sharing options for different network profiles] and save the changes. Use the Thunderbolt cable to connect two notebook PCs. A while later, an icon of the connected computer appears on the desktops of the two notebook PCs.
Page 144 Using the PC Double-click the connected computer icon to open the authentication screen. Input the user name and password to connect to the other PC. If there is no shared folder in the connected PC, nothing may appear on the screen.
Page 145 Using the PC Using USB-C (Thunderbolt ) Charging Function You can connect the USB-C device to charge a notebook PC battery or an external device, and the operation mode is automatically selected depending the charge settings of the connected device. To charge a notebook PC battery, the external device (USB PD Charger, notebook PC, etc.) should support USB Power Delivery 10 W (5 V / 2 A) or higher profile.
Page 146 Using the PC When the connected device is set to Sink (the connected device is charged.) The charging status of the external device being charged is not displayed on the notebook PC. If you connected a smartphone, you should select "Charge mobile phone" on the smartphone screen to charge the phone battery.
Page 147 Using the PC Bluetooth Bluetooth allows the user to access wirelessly various devices such as camera, cell phone, headset, printer, and GPS receiver that support Bluetooth . It can also establish a network and exchange data with other Bluetooth -enabled PC or smartphone. OPTION The Bluetooth device is optional, and it may not be available in some models.
Page 148 Using the PC Select [Bluetooth & devices] > [Add device].
Page 149 Using the PC Select the Bluetooth to search for Bluetooth devices automatically. After selecting the device you want to connect, complete the Bluetooth connection as guided.
Page 150: Wired Lan
Using the PC Wired LAN LAN is the network environment that users can connect to by using a cable to connect to their internet providers or the company's network. Using Wired LAN LAN is installed with an automatic IP (DHCP) as default value. Please refer to the following instructions for details on setting up an automatic IP (DHCP) or manual Connect the LAN adapter to the USB-C port on the PC.
Page 151 Using the PC Connect the wired LAN cable to the LAN port.
Page 152 Using the PC Select the Start button [ ] > [Settings]. Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. Select [Edit] in [Network & Internet] > [Ethernet] > [IP assignment].
Page 153 Using the PC To use an automatic IP (DHCP), select [Automatic]. If you wish to use a static IP, set [Manual] > [IPv4] to [On] and enter the necessary item. Contact the network service provider or administrator to use a static IP. Select [Save] to complete the network setup.
Page 154: Wireless Lan
Using the PC Wireless LAN The wireless network (Wireless LAN) is the network environment that connects a PC with the internet provider or company network through an Access Point (wireless or regular router). Turning On/Off Airplane Mode Prior to using the wireless LAN, press [Fn] + [F6] to turn off Airplane Mode. Pressing [Fn] + [F6] keys will turn on or off the Airplane Mode.
Page 155 Using the PC Select Manage Wi-Fi Connections [ ] to search for near Access Point. When Wi-Fi is turned off, set [Wi-Fi] to On.
Page 156 Using the PC Select the Access Point you want to connect to and press [Connect]. If a connection is established, [Connected] appears below the Access Point name. Click the Web Browser icon to check whether the internet is operating normally.
Page 157 Using the PC Using a Wired/Wireless Router A wireless/regular router connects several PCs and mobile devices to one internet line and enables the use of internet and the network. A wireless/regular router has to be bought separately. Refer to the manual provided by the manufacturer for instructions.
Page 158 Using the PC UFS/microSD Slot Checking Available Memory Card This model supports UFS and microSD memory cards. Directly applicable memory cards Mounting and Using Memory Card This product supports one UFS/microSD slot. Make sure that the insertion direction of the memory card is correct and push it in until the UFS or microSD memory card is fully seated.
Page 159 Using the PC When the memory card is formatted, the data stored in the memory card will be deleted. Check whether there are important data before formatting the memory stick. To format a memory card, right-click the memory card drive and select Format. When the Format window appears, press Start to continue.
Page 160: Using Software
Using Software LG Smart Assistant LG Smart Assistant allows you to easily change the settings of your PC according to your needs. Menus and supported functions may differ depending on the model. Please update the program to the latest version through LG Update.
Page 161 AI Noise Canceling: Allows you to set the noise canceling function for the microphone input and the speaker output. Go to LG Software: Allows you to run LG Update and LG PC Manuals directly. Dashboard User Mode: Allows you to set the user mode according to the PC environment.
Page 162 Using Software Cooling Mode: Allows you to set the fan mode of the PC according to the PC environment. No Noise Mode: Limits the PC performance so that the PC does not generate fan noise. (The PC surface temperature may rise when the function is used for a long time. It automatically changes to the Normal Mode upon reboot.) Low Mode: Minimizes fan speed so that you can use the PC in a quiet environment.
Page 163 Using Software Keyboard Setting Keyboard Lighting: Allows you to set the keyboard lighting and brightness. Turn off the keyboard lighting automatically: Allows you to set the keyboard light to turn off automatically after a specified amount of time. Lock Fn Key: Allows you to set the hot keys (F1 - F12) to operate even without pressing Fn. Display NumLock Key Status: Allows you to set the screen to display the status change when you press the NumLock key.
Page 164 Using Software Set custom Hot Keys: Allows you to register an app or internet address to a custom hot key. On the Hot Keys Settings List, select the navigation icon [ ] or the internet icon [ ] to register the desired app or Internet address to a hot key. Some abnormal program files (exes) and Internet addresses (links) may not be linked.
Page 165 Using Software After selecting the app-running file, right-click the mouse and use the [Show more options] > [Set functions to use with user Hot keys] menu to register the app quickly.
Page 166 Using Software Power Setting Battery Life Status: Displays the battery status so that you can replace the battery timely. Extend Battery Life: Allows you to lower the max. battery charge level to 80% to extend the battery lifespan. Power & Sleep: Displays the screen off time and the sleep mode entry time. You can go to Windows settings and set the time.
Page 167 Using Software Display Setting Color Temperature Settings: Allows you to adjust the screen color temperature to cool (bluish screen color) or warm (reddish screen color) or use the automatic color temperature function. Reader Mode: Allows you to set the Reader Mode to reduce eye fatigue when reading documents. CAUTION Using the Reader Mode and the Night light at the same time can cause color distortion.
Page 168 Using Software AI Noise Canceling AI Microphone Optimization: Cancels out the noise input to the microphone to deliver clear sound. AI Speaker Optimization: Cancels the noise output from the speakers to deliver clear sound.
Page 169 It may not work properly depending on user environment (security tools, etc.) and the network status. You can use LG Update to install deleted drivers or latest drivers easily and quickly. Use LG Update to keep your system current and optimized.
Page 170 Using Software Update If an item that needs updating is displayed, you can select it and update it. Select [Required Updates] or [Update List] from the [Update] menu. After selecting the items to update, select [Installation].
Page 171 Using Software DTS:X Ultra DTS:X Ultra provides rich, sonorous sound when you listen to music, watch videos or play games in the DTS:X Ultra may not be applied depending on the model. The figures herein are subject to change without prior notice. Running DTS:X Ultra Select the Start button [ ] >...
Page 172 Using Software Music: Provides an optimized environment for music playback. Voice: Provides an optimized environment for voice playback. Movies: Provides an optimized environment for movie playback. Strategy, RPG and Shooter: Provides an optimized environment for each game. Custom Audio: Selects the spatial model and adjusts the expansion power, and it is optimized for each setting.
Page 173 The app may not work properly on some smartphone models and upgrading the operating system of a smartphone may prevent some features from working properly. In order to use a dialer with a Microsoft user s mobile phone, you need to uninstall Virtoo by LG app and driver.
Page 174 Using Software Select [Get Started], and then follow the instructions to connect your smartphone to the PC.
Page 175 Mirroring: Allows you to display the screen of the connected smartphone on your PC and access it from the PC. Notifications: You can check your phone's notifications on the Virtoo by LG app screen. Dialer: Allows you to browse the contacts stored in your smartphone and send text or make a phone call to the contacts.
Page 176 Android: The transferred files are classified by file type in [ ] > [My received files] of the Virtoo by LG app. iPhone: The transferred files are saved in the album. You can drag & drop files to share files from your PC to your smartphone.
Page 177 Select the desired file from the [Files] menu. You can select multiple files to import, and select the [ ] icon to directly import the files. Imported files will be saved in [This PC] > [Pictures] > [Virtoo by LG] folder on the PC.
Page 178 Using Software Select [GET FILE]. Sending files from your smartphone...
Page 179 Using Software Select [Share File].
Page 180 Using Software When the [Share File] menu appears, select the desired option to send the file. File Sharing with Mirroring Mirroring must be enabled to use the file sharing with mirroring feature. Only Android smartphones support the file sharing feature through mirroring. Only one file can be transferred at a time and it may take a while if the file is big.
Page 181 Using Software Select the [Activate] in the [Mirroring] menu and connect the smartphone to the PC according to the instructions.
Page 182 Using Software When the smartphone screen appears on the PC, select the [Share] icon. Select the file you wish to share to your smartphone and select [Open].
Page 183 Using Software When the Share menu appears on the smartphone, select the desired app to share the file. Displaying Notification Messages When your smartphone receives a notification, phone call, text message, app notification message, or email, a notification message is displayed on the PC screen.
Page 184 (Android or iPhone) is out of date. You can update your PC and mobile device as below: Please initialize your app after it is updated. PC app: In Microsoft Store, search for and update the Virtoo by LG app. Smartphone app: In Google Play or App Store, search for and update the Virtoo by LG app.
Page 185 The figures herein are subject to change without prior notice. Running LG Glance by Mirametrix ® Select the Start button [ ] > [All apps] and run [LG Glance by Mirametrix ® The tutorial (help on how-to-use) for LG Glance by Mirametrix ®...
Page 186 Using Software Presence Detection: If the user does not look at the screen or leaves the screen for a certain period of time, the screen is locked or darkened. Snap Window: (When an external monitor is connected) Click and hold the title bar of the desired window, move your head to the external monitor or the notebook PC screen to move the window to the screen you are looking at.
Page 187 Using Software according to the user's movement and compensates the face or the lighting to make your face look more beautiful. Settings: Provides the settings menu and tutorial (help on how to use) of LG Glance by Mirametrix ®...
Page 188 Using Software PCmover Professional PCmover Professional transfers applications, files (pictures, music, videos, and documents) and settings from your old PC to your new PC. The old and new PCs must be connected under the same network. For details on how to use PCmover Professional, see the [User Guide] of PCmover Professional.
Page 189 Using Software PCmover Professional Tour User Guide: You can find out more about how to use PCmover Professional. TRANSFER BETWEEN PCs: Starts the process of transferring data (apps, files, settings, etc.) between the old PC and the new PC. Advanced Options: Allows you to create a transfer file on an external media (USB disk, etc.) and transfer it to a new PC, or to transfer it to a new PC using a disk image backed up from the old PC.
Page 190: Recovering The System
Recovering the System Recovering the System Restoring the System If the system has an error, you can use Windows recovery function to recover or restore the system to its initial pre-purchase state. CAUTION If you have deleted the restoration data in the protected area of the disk, or have arbitrarily installed another operating system, the restore function may not work.
Page 191 Recovering the System Select [Reset PC] in [System] > [Recovery] > [Reset this PC]. Select the options you want to proceed with the recovery.
Page 192 Recovering the System Keep My Files It removes the apps and their settings without loss of personal files. Select [Keep my files].
Page 193 Recovering the System Select How to Reinstall Windows. If the PC is not connected to the Internet, the screen for selecting Windows installation method does not appear. [Cloud download] is a menu for downloading Windows from Microsoft Cloud Server and reinstalling it.
Page 194 Recovering the System Check the current settings and select [Next] to perform the recovery according to the instructions. If you select [Change Settings], you can change the current settings. Remove everythings Removes all items from the system and restores the system to its initial pre-purchase state. CAUTION All data is lost during the initialization, so you must backup all critical data in advance.
Page 195 Recovering the System Select [Remove everything].
Page 196 Recovering the System Select How to Reinstall Windows. If the PC is not connected to the Internet, the screen for selecting Windows installation method does not appear. [Cloud download] is a menu for downloading Windows from Microsoft Cloud Server and reinstalling it.
Page 197 Recovering the System Check the current settings and select [Next] to perform the recovery according to the instructions. If you select [Change Settings], you can change the current settings.
Page 198: Setup And Upgrade
] > [All apps] and run [LG Update]. Select [Required Updates] or [Update List] to install the driver. You can use LG Update to install deleted drivers or latest drivers easily and quickly. Use LG Update to keep your system current and optimized.
Page 199: Starting System Setup
Setup and Upgrade Starting System Setup System setup means storing the hardware configuration information of the PC in the flash memory. Through system setup, the PC retrieves various information including current date and time, memory capacity, and storage device (HDD, SSD, eMMC) capacity and type. You setup the system when you set passwords, change the boot order, and add new peripheral devices to the machine.
Page 200 Setup and Upgrade In a few moments, the system setup screen appears. Keys Used in System Setup Keys Function Enter Selects the current item. To deselect the current item or to move to the previous screen. Moves the cursor up, down, left, and right. , , , (Arrow keys) F5, F6...
Page 201 Setup and Upgrade Setting the Boot Password This process is to set a password so that other people cannot use the computer or change the settings. The user can set a password while booting the system or setting up the system. The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice.
Page 202 Setup and Upgrade Reboot the system and press [F2] multiple times. When the System Setup screen appears, go to [Security] > [Set Supervisor Password] using the arrow keys and press the [Enter] key.
Page 203 Setup and Upgrade When the Password Setting screen appears, enter a password and press the [Enter] key. The password should not exceed 20 characters and should consist of English letters (A - Z), numbers (0 - 9), and special characters or a combination of them. Enter the password once more and press the [Enter] key.
Page 204 Setup and Upgrade Execute the System Setup screen, go to [Security] > [Set User Password] using the arrow keys and press the [Enter] key. When the Password Setting screen appears, enter a password and press the [Enter] key. The password should not exceed 20 characters and should consist of English letters (A - Z), numbers (0 - 9), and special characters or a combination of them.
Page 205 Setup and Upgrade To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes] and press the [Enter] key. The PC will restart. Power on Password [Power on Password] protects your system by requiring during booting to enter the password set in [Set Supervisor Password] or [Set User Password].
Page 206 Setup and Upgrade Set PCIE SSD Password [Set PCIE SSD Password] is to set the password directly on the storage device separately from [Set Supervisor Password]. Some models with built-in PCIE SSD may not support the password setting function. For the models equipped with two storage devices, you can set a password for each device. If passwords are set for both devices, the password input window appears twice during the booting process.
Page 207 Setup and Upgrade When the Password Setting screen appears, enter a password and press the [Enter] key. The password should not exceed 32 characters and should consist of English letters (A - Z), numbers (0 - 9), and special characters or a combination of them. Enter the password once more and press the [Enter] key.
Page 208 Setup and Upgrade Deleting/Changing the Boot Password You can delete or change the password only after entering the current password. The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice. Changing the Boot Password Execute the System Setup screen, enter the password, and press the [Enter] key.
Page 209 Setup and Upgrade When the System Setup screen appears, go to [Security] > [Set Supervisor Password] using the arrow keys and press the [Enter] key. Enter the current password in the [Enter Current Password] field. Press the [Enter] key in the [Create New Password] field.
Page 210 Setup and Upgrade When a pop-up window appears, select [Yes] and press the [Enter] key. To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes] and press the [Enter] key. The PC will restart. Deleting the Boot Password (Set PCIE SSD Password) Execute the System Setup screen, enter the password, and press the [Enter] key.
Page 211 Setup and Upgrade When the System Setup screen appears, go to [Security] > [Set PCIE SSD1 Password] using the arrow keys and press the [Enter] key. For the models equipped with two storage devices, the menu names are shown as PCIE SSD1, PCIE SSD2, etc.
Page 212 Setup and Upgrade When a pop-up window appears, select [Yes] and press the [Enter] key. To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes] and press the [Enter] key. The PC will restart.
Page 213 Setup and Upgrade Initializing System Setup If you have changed the system setup by mistake, you can restore the default settings. The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice. Execute the System Setup screen, go to [Exit] >...
Page 214 Setup and Upgrade To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes] and press the [Enter] key. The PC will restart.
Page 215: Changing The Boot Order
Setup and Upgrade Changing the Boot Order The user can change the boot order according to his or her needs, or select a boot device The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice.
Page 216 Setup and Upgrade Go to [Boot Type Order] and press [F5] or [F6] to change the booting order. To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes] and press the [Enter] key. The PC will restart.
Page 217 Setup and Upgrade Selecting a Booting Device to Use Reboot the system and press [F10] multiple times. When the Select Boot Device screen appears, go to the desired device using the arrow keys and press the [Enter] key. Boots using the selected device.
Page 218 Setup and Upgrade Setting Auto Scaling The Windows Auto Scaling feature for user's convenience may partially blur the screen or display some icons and texts larger. Refer to the following information to change the DPI scaling to suit your needs. Select the Start button [ ] >...
Page 219 Setup and Upgrade Changing the [Scale] item value changes the auto scaling settings. After changing the Auto Scaling settings, some apps must be shut down and restarted for the scaling and layout to take effect.
Page 220 Instant Booting allows the system to boot automatically when the notebook PC cover is opened, so that you can use the system without pressing the power button. Select the Start button [ ] > [All apps] and run [LG Smart Assistant]. Turn on [Instant Booting]. Shutdown the system and close the notebook PC cover.

LG 16T90Q Series Easy Manual

Quick Links

Related Manuals for LG 16T90Q Series

Summary of Contents for LG 16T90Q Series

Table of Contents