Brake light switches
The brake light is activated by switches
connected to the brake lever and brake
pedal. Check that the brake light
comes on just before braking takes ef-
fect. If necessary, adjust the rear brake
light switch as follows.
2
1
(a)
(b)
1. Rear brake light switch
2. Rear brake light switch adjusting nut
Turn the rear brake light switch adjust-
ing nut while holding the rear brake
light switch in place. To make the
brake light come on earlier, turn the ad-
justing nut in direction (a). To make the
brake light come on later, turn the ad-
justing nut in direction (b).
Periodic maintenance and adjustment
EAU22275
TIP
The front brake light switch should be
serviced by a Yamaha dealer.
7-21
Checking the front and rear
brake pads
The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
Front brake pads
1
1
1. Brake pad wear indicator groove
Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear
EAU22393
EAU22433
7