Black & Decker KA88 Original Instructions Manual page 7

The dust cassette filter is re-usable and should be
cleaned regularly.
● Empty the dust cassette (11) as described above.
@
● Pull the filter (14) off the dust cassette.
Warning! Do not twist the filter.
@
● Shake off excess dust by tapping the filter into a dustbin.
Warning! Do not brush or use compressed air or
sharp objects to clean the filter. Do not wash the filter.
● Replace the filter.
● Refit the cover.
● Refit the dust cassette onto the tool.
Hints for optimum use
● Always hold the tool with both hands.
● Do not exert too much pressure on the tool.
● Regularly check the condition of the sanding belt.
Replace when necessary.
● Always sand with the grain of the wood.
● When sanding new layers of paint before applying another
layer, use extra fine grit.
● On very uneven surfaces, or when removing layers of
paint, start with a coarse grit. On other surfaces, start with
a medium grit. In both cases, gradually change to a fine
grit for a smooth finish.
● Consult your retailer for more information on
available accessories.
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very
best from your tool.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
@
regular cleaning.
WARNING! Before performing any maintenance on
the tool, remove the battery from the tool. Unplug the
charger before cleaning it.
● Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
● Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
(original instructions)
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.

Connect the brown lead to the live terminal in the

new plug.
@
Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth
terminal. Follow the fitting instructions supplied with
good quality plugs. Recommended fuse: 5 A.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
Technical Data
Input voltage
Power input
Belt speed
Sanding base
Weight
Level of sound pressure according to EN62841:
Sound pressure (L ) 91 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 102 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to
EN62841:
Vibration emission value (a
uncertainty (K) 1.5 m/s
English
KA88
Type 3
V 230
AC
W 720
m/min 250
mm 75 x 533
kg 3.7
) 5.3 m/s ,
2
h
2
7