Table of Contents
Advertisement
NOTE:
Due to the weight of the bench seat, it is recom-
mended that two people are utilized for its
removal.
When storing the removed bench seat, it is
important to keep the seatback in the folded
position.
Reinstalling The Bench Seat
1. To reinstall the bench seat, align the seats
front attachments into the detent positions
on the floor.
2. Tilt seat rearward to lock the seatback into its
original position.
NOTE:
Push downward to ensure the rear latches are in
the locked position.
3. Lift the recline handle and return the seatback
to the seating position.
WARNING!
If not properly latched, the seat could become
loose. Personal injuries could result.
Second Row Removable 8th Seat —
If Equipped
While the 8th seat does not stow in the floor, it is
foldable and removable for added cargo space.
Second Row 8th Seat Fold Flat Strap
The release strap is located on the front of the
seat, near the floor. To remove the seat, pull the
release strap to release the rear latches. The seat
assembly can now be removed from the vehicle by
moving it in a rearward direction from the detent
positions in the floor.
GETTING TO KNOW YOUR VEHICLE
Release Strap
NOTE:
The seat can be removed easier with one outboard
seat stowed in the load floor.
To reinstall the seat, align the seat into the detent
positions on the floor. Tilt seat rearward to lock the
seatback into its original position.
In Floor Detent Guides
37
2
Advertisement
Table of Contents
