Rear I/O Panel; Lan Port Led Status Table - MSI MEG Z690I UNIFY User Manual

Rear I/O Panel

DisplayPort
Clear CMOS
button
∙ Clear CMOS button - Power off your computer. Press and hold the Clear CMOS
button for about 5-10 seconds to reset BIOS to default values.

LAN Port LED Status Table

Link/ Activity LED
Status Description
Off No link
Yellow Linked
Blinking Data activity
Audio 7.1-channel Configuration
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1. Click on the Realtek Audio Console > Advanced Settings to open the dialog below.
2. Select Mute the rear output device, when a front headphone plugged in.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device is
current connected.
2.5 Gbps LAN
Wi-Fi Antenna
connectors
USB 3.2
USB 3.2
Gen1
Gen2
(5Gbps)
(10Gbps)
Type-A
Type-A
Thunderbolt 4
(USB-C)
Mini DisplayPort
Input (for
Thunderbolt
passthrough)
Speed LED
Status Description
Off 10 Mbps connection
Green 100/1000 Mbps connection
Orange 2.5 Gbps connection
Line-out
Line-in
Mic-in
11
Rear I/O Panel