Printed Circuit Board - Panasonic SB-WA920PP Service Manual

- Put a conductive mat on the work table.
- Ground the soldering iron.
- Do not touch the pins of IC, LSI or VLSI with fingers directly.

10. Printed Circuit Board

11. Wiring Connection Diagram
12. Illustration of IC's, Transistors and Diodes
13. Parts Location and Replacement Parts List
Notes:
- Important safety notice:
Components identified by
important for safety.
Furthermore, special parts which have purposes of fire-retardent
(resistors), high-quality sound (capacitors), low noise (resistors),
etc are used.
When replacing any of these components, be sure to use only
manufacturer's specified parts shown in the parts list.
- The parenthesized indications in the Remarks columns specify the
areas or colour. (Refer to the cover page for area or colour)
Parts without these indications can be used for all areas.
- Capacitor values are in microfarads (
mark have special characteristics
F) unless specified
17