Sony DSC-QX10 Service Manual page 32

Installation
1. Align the Lever with the cutout as shown in the figure, and then install the Straight Tube to the Cam Tube B.
Note: Be sure to set the Straight Tube at the correct insertion position.
2. Turn the Straight Tube in the arrow direction to the maximum.
Straight Tube
Lever
Cam Tube B
Cutout
3. Install the Straight Tube Block aligning the thinnest groove with the white part as shown in the figure, and then turn
the Cam Tube B in the arrow direction to the maximum.
Straight Tube Block
Thinnest Groove
White Part
3 Group Assy
4. Install the 2 Group Frame at a position where the Shaft of 3 Group Assy is visible through the cutout of the 2 Group Frame.
2 Group Frame
DSC-QX10
Top side view
Shaft of 3 Group Assy
2 Group Frame
4-14
Straight Tube
Cam Tube B