Sony DSC-QX10 Service Manual page 28

(3) Three Tube Lubricating Block Assy and Group 1 Frame Replacing Method
Removal
1. Disengage the two claws and remove the FG Leaf Spring.
2. Remove the two Sensors.
3. Disengage the claw and remove the FPC Retainer.
4. Disconnect the flexible board from the connectors on the LF-139 Flexible Board.
5. Peel off the FPC Tape.
Claw
FPC Retainer
6. Remove the LF-139 Flexible Board.
LF-139 Flexible Board
Boss
Ribs
Boss
Rib
7. Remove the four screws and remove the Z Retainer and the Sensor.
Z Retainer
Screws
DSC-QX10
Claws
FG Leaf
Spring
Sensors
Rib
Boss
Rib
Boss
Screw
Sensor
Flexible board
Connector
4-10
Connector
Flexible board
FPC Tape