Fillpolygon Method - Citizen CL-S700 Programming Manual

2.3.20 fillPolygon method

Syntax
int fillPolygon (int[] x, int[] y, int pattern)
Parameters
Parameter [IN/OUT] Description
x [IN]
y [IN]
pattern [IN]
Description
Draws a closed polygon defined by arrays of x and y coordinates, with the specified shaded pattern.
Each pair of (x, y) coordinates defines a point. The number of elements must match. Returns
CLS_E_ILLEGAL(1101) otherwise.
Return value
Returns CLS_SUCCESS(0) on success, an error code otherwise. See
codes.
Example
int[] x = new int[] {100, 200, 250, 150};
int[] y = new int[] {100, 100, 200, 200};
design.fillPolygon(x, y, LabelConst.CLS_SHADED_PTN_3);
// Draw a parallelogram
Setting range
X points 0000 - 9999
* The origin is at bottom-left.(0, 0)
Y points
Shaded pattern CLS_SHADED_PTN_0： Shaded pattern 000
CLS_SHADED_PTN_1： Shaded pattern 001
CLS_SHADED_PTN_2： Shaded pattern 002
CLS_SHADED_PTN_3： Shaded pattern 003
CLS_SHADED_PTN_4： Shaded pattern 004
CLS_SHADED_PTN_5： Shaded pattern 005
CLS_SHADED_PTN_6： Shaded pattern 006
CLS_SHADED_PTN_7： Shaded pattern 007
CLS_SHADED_PTN_8： Shaded pattern 008
CLS_SHADED_PTN_9： Shaded pattern 009
CLS_SHADED_PTN_10： Shaded pattern 010
CLS_SHADED_PTN_11： Shaded pattern 011
84
CITIZEN Android Label Print SDK — Programming Manual
"2.1 Return value" for the error