Fillcircle Method - Citizen CL-S700 Programming Manual

2.3.18 fillCircle method

Syntax
int fillCircle (int x, int y, int radius, int pattern)
Parameters
Parameter [IN/OUT] Description
x [IN]
y [IN]
radius [IN]
pattern [IN]
Description
Draws a circle of the specified radius and shaded pattern.
Return value
Returns CLS_SUCCESS(0) on success, an error code otherwise. See
codes.
Example
design.fillCircle(100, 100, 40, LabelConst.CLS_SHADED_PTN_2);
Start position
( X-coordinate, center )
Start position
(Y -coordinate, center )
Radius
Shaded pattern
82
CITIZEN Android Label Print SDK — Programming Manual
Setting range
0000 - 9999
* The origin is at bottom-left.(0, 0)
0000 - 0398
CLS_SHADED_PTN_0： Shaded pattern 000
CLS_SHADED_PTN_1： Shaded pattern 001
CLS_SHADED_PTN_2： Shaded pattern 002
CLS_SHADED_PTN_3： Shaded pattern 003
CLS_SHADED_PTN_4： Shaded pattern 004
CLS_SHADED_PTN_5： Shaded pattern 005
CLS_SHADED_PTN_6： Shaded pattern 006
CLS_SHADED_PTN_7： Shaded pattern 007
CLS_SHADED_PTN_8： Shaded pattern 008
CLS_SHADED_PTN_9： Shaded pattern 009
CLS_SHADED_PTN_10： Shaded pattern 010
CLS_SHADED_PTN_11： Shaded pattern 011
"2.1 Return value" for the error