Table of Contents
Advertisement
Display
Set the focus-mode
selector to MF.
Memory contains no
images.
File contains no
image data.
All images are
hidden.
This image cannot be
deleted.
Raise the flash.
Turn the camera off
and then on again.
Speedlight setting
error
Communications
error
System error
Technical Notes
Error Messages
Downloaded from
When Clean HDMI output is set to On and the camera
is connected to an HDMI-compatible device, set the
focus-mode selector to r.
Insert a memory card that contains images.
The file was not created or edited with this camera.
The file cannot be viewed on this camera.
View the file using a computer or the device used to
create or edit this file.
There are no images available for a slide show, etc.
There are no images that can be displayed on the
image selection screen for deletion.
The image is protected.
Disable protection.
When the scene mode is Scene auto selector, you
can capture an image even if the built-in flash is
lowered but the flash will not fire.
When the scene mode is Night portrait or
Backlighting with HDR set to Off, you must raise
the built-in flash to capture an image.
A lens error occurred. Do not apply force to the lens.
Turn the camera off and then on again to return the lens
to normal operation. If the error persists after turning
the camera off and on, contact your retailer or Nikon-
authorized service representative.
A Speedlight function that cannot be used with the
camera is set. Change the Speedlight setting.
An error occurred while communicating with the
printer.
Turn the camera off and reconnect the USB cable.
An error occurred in the camera's internal circuitry.
Turn the camera off, remove and reinsert the battery,
and turn the camera on. If the error persists, contact
your retailer or Nikon-authorized service representative.
ManualsNet.com
Cause/Solution
197
search engine
A
5, 177
16
–
–
159
34
35, 37
199
211
105
199
Advertisement
Table of Contents
