Table of Contents
Advertisement
Option
Wi-Fi
Bluetooth
Restore default settings
* See "Operating the Text Input Keyboard" (A163) for information on how to enter
alphanumeric characters.
C
Bluetooth Communication Indicator on the Shooting Screen
Lights up while the camera is connected to a smart device via Bluetooth.
Flashes when the camera is waiting for the connection to a smart device to be re-
established. Also flashes when the Bluetooth connection is cut off while uploading images
(A206).
Using the Menu
The Network Menu
Downloaded from
SSID*: Change the SSID. Set a 1- to 32-character
alphanumeric SSID.
Auth./encryp.: Select whether or not to encrypt the
communications between the camera and the connected
smart device.
Communications are not encrypted when Open is selected.
Password*: Set the password. Set an 8- to 36-character
alphanumeric password.
Network
settings
Channel: Select the channel used for the Wi-Fi connection.
If the communication quality is poor or the image upload
speed is extremely slow when using a Wi-Fi connection, try
changing the channel.
Subnet mask: Use the default setting (255.255.255.0)
under normal conditions.
DHCP server IP address: Use the default setting
(192.168.0.10) under normal conditions.
Current
Display the current settings.
settings
Connection
Select Disable to turn off Bluetooth communication.
Change the smart device to connect with, or delete the
Paired
connected smart device. Up to five smart devices can be
devices
registered in the camera, but the camera can connect to
only one device at a time.
Set whether or not to allow the camera to communicate
Send while
with the smart device when the camera is off or in standby
off
mode (A24).
Restore all network menu settings to their default values.
ManualsNet.com
Description
162
search engine
Advertisement
Table of Contents
