Frequently Asked Questions - Siemens RUGGEDCOM APE1808 Configuration Manual

Frequently Asked Questions

General
Q:
A:
Q:
A:
Linux
Q:
A:
Q:
A:
Q:
A:
RUGGEDCOM APE1808 (Application Processing Engine)
Configuration Manual, 05/2022, C79000-G8976-1415-04
How do I power a USB DVD-ROM drive or USB hard disk using the
RUGGEDCOM APE1808 USB port?
The RUGGEDCOM APE1808 USB port is limited in the amount of power it can
provide. Use a powered hub to employ devices such as these.
How can I re-install the software platform on the RUGGEDCOM APE1808?
There are two possible options:
• Return the RUGGEDCOM APE1808 module to Siemens and request a re-
install. This service is not covered by warranty.
• Restore the backup image that was made before commissioning the
RUGGEDCOM APE1808 module.
How do I recover an image of the original factory settings?
Siemens strongly recommends creating a backup image of the RUGGEDCOM
APE1808 before it is configured. If this image is available, it can be easily
restored.
If an original backup image is not available, contact Siemens Customer Support
for assistance. In most cases, the RUGGEDCOM APE1808 module must be
returned to the factory to be re-imaged. This service is not covered by warranty.
Does the RUGGEDCOM APE1808 support a Real Time Operating System
(RTOS)?
The software distributed by Siemens does not include an RTOS component.
However, this software could be installed.
Does the RUGGEDCOM APE1808 have a serial port?
The RUGGEDCOM APE1808 does not have serial ports.
3
19