Sirius Satellite Radio SDSV6V1 User Manual page 19

3
Attach the Vent Mount to the
PowerConnect Vehicle Dock using
the provided screws .
4
Push the Vent Mount onto the
vehicle vent as shown (1) until
it hooks on the rear of the vent
louver (2) .
5
Rest the foot against the
bottom of the vent (2), and adjust the tilt of the Vent Mount by
repositioning the foot to a different adjustment hole (3) .
1
PUSH
To remove the Vent Mount, push the mount into the vent . Then lift up until
disengaged from the rear of the vent louver, and remove the Vent Mount .
2
Dash
Vent
FOOT
Louver
Dash
HOOKED
Vent
TILT
ADJUSTMENT
HOLES
3
Dash
Vent
19