Vehicle Installation
Installing the Vent Mount:
1
Locate a vent with horizontal
louvers sturdy enough to hold your
PowerConnect Vehicle Dock and radio .
2
If the vent louvers in your vehicle are
recessed, you may need to use the
longer vent clamps with the Vent Mount .
If so, Remove the shorter vent clamps
and install the longer ones into the
Vent Mount . Be sure to observe the
orientation of the vent clamps as shown .
18
Remove End Cap
Slide Extended Vent Clamps In
Extended Vent Clamps
Short Vent
Clamps
Slide Short Vent Clamps Out
Replace End Cap