Sirius Satellite Radio SDSV6V1 User Manual page 17

4
Clean the surface with the alcohol preparation pad and let it dry
thoroughly .
5
Peel off the adhesive liner . Position,
press, and hold the Dash Mount and
PowerConnect Vehicle Dock in place for
30 seconds .
IMPORTANT! Allow the Dash Mount adhesive
to cure (dry) for a minimum of 2-4 hours before using the mount . The best
adhesion occurs after 24 hours .
6 The dock mounting plate can be tilted in different directions .
Adjust as necessary for your particular vehicle . When the
orientation is correct, tighten the knob .
Knob Adhesive Foot
TIP! To remove, carefully lift the adhesive pad with your fingers or a spoon .
Warming the pad with a hair dryer for several minutes will help soften the
adhesive .
Dock Mounting
Plate
17