Siemens 300 Operating Instructions Manual page 18

Logging the mobile unit onto Hicom 300:
x2
NE XT
S ettings
O K
NE XT
Regis tra te
O K
S tation 1
O K
e.g.
O K
O K
Off status: display clear – calls are not received!
On status: e.g. Station 1 is displayed – prerequisite for all telephone
features. This is the normal operating status.
Putting into service
Activate the mobile unit with the On/Off key -
logged on or
logged on.
Press the function key twice (first logon only) – the main
menu is displayed.
Use the left display key
is marked (in upper display line) and press the right
display key
Scroll to
e.g. confirm
system code is displayed.
If necessary, select other stations/systems by pressing
.
NE XT
... Enter the system code (8-digit) and confirm with
If necessary, press
Confirm
key – if logon is successful,
and the ring symbol also flashes.
! is displayed the first time the unit is
NE XT
to confirm.
O K
with the display key and confirm.
* for logon as system1 – Enter
to correct entry.
* the second time it is
to scroll until
* with the display
* is displayed
O K
18