Wash Programme Progress - AEG KO-LAVAMAT 88840 User Information

Operating Instructions

Wash programme progress

Programme Progress Display
Prior to the start, the programme steps chosen are dis-
played by the programme progress display. During the
wash programme the current programme step is dis-
played.
Multi-display
The expected time remaining (in minutes) to
the end of the programme is shown in the
Multi-display.
The multi-display indicates the estimated duration, in minutes, of the
3
programme. These timings are estimates and can be varied and influ-
enced by incoming water temperature, type and quantity of laundry,
out of balance spin detection and foam detection.
MOISTURE%/LOADING% Display
The display alternates between the following
indicators:
• Expected residual moisture in the washing at
the end of the programme.
The value depends on the selected spin speed.
• Loading of the drum (in 10 per cent steps.)
This value is indicated with the COTTONS/LINEN, EASY-CARES pro-
gramme only.
The loading can be estimated by the washing machine about ten
minutes into the programme. As soon as a loading value is available,
the display switches between Moisture and Loading.
Overloading of the drum is indicated by a value of120 (per cent).
Due to differences in fabric types and loads, washing will have a lower
3
Residual Moisture value in the EASY IRON and DELICATES programme
than in the COTTONS/LINEN, EASY-CARES (Cottons) programme.
Changing the Spin Speed
The Spin Speed can be changed, or Rinse Hold (display symbol 0) set,
while the wash programme is running.
Other settings cannot be changed.
26