Sharp SD-PX2 Operation Manual page 59

Warning:
Install brackets properly following the operation manual. Improper installation may
cause the main unit to fall leading to injury or breakage.
To ensure a proper installation, contact your dealer or installer.
During installation, be careful not to pinch your fingers.
The wall should be strong enough to support the weight of the main unit. (Install
on a reinforced part.)
Do not impose an extra load on a wall bracket. It may cause the main unit to fall
leading to injury or breakage.
Do not modify or change the main unit bracket. It may cause the main unit to fall
leading to injury or breakage.
Caution:
Do not block the ventilation opening of the main unit with a tablecloth, etc. Heat
may be kept inside causing fire.
Select a mounting position carefully to avoid injury by hitting head.
Never step on or hang from the main unit. Pay special attention to children. It may
cause injury or breakage to the main unit.
Check the wall strength. SHARP is not liable for accidents caused by insuffi-
cient strength of the wall or improper mounting.
Improper mounting may cause the main unit to fall. If you need assistance,
contact your dealer or installer.
SD-PX2
ENGLISH
E-54