Sharp Conference Series XG-V10WU Operation Manual page 46

Adjusting the Picture
Projector
(GUI) On-screen Display
Projector
(GUI) On-screen Display
E-45
Remote Control
1, 5
2, 3
4
1.2.3 4.5.6
Remote Control
1, 5
2, 3
4
1.2.3 4.5.6
Selecting the Signal Type
This function allows you to select the input signal type
RGB (VIDEO) or COMPONENT for INPUT 1, 2, 4 or 5
port.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU. Menu bar and "Picture" menu
screen appear. GUI operation guide is also
displayed.
2 Press ∂/ƒ to select "Signal Type", and then
press ©.
3 Press ∂/ƒ to select "RGB (VIDEO)" or
"Component".
4 Press ENTER to save the setting.
5 To exit from the GUI, press MENU.
Progressive Mode
This function allows you to select the progressive display
of a video signal. The progressive display projects a
smoother video image.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU. Menu bar and "Picture" menu
screen appear. GUI operation guide is also
displayed.
2 Press ∂/ƒ to select "Progressive Mode", and
then press ©.
3 Press ∂/ƒ to select "2D Progressive", "3D
Progressive" or "Film Mode".
4 Press ENTER to save the setting.
5 To exit from the GUI, press MENU.
Progressive Mode
Selects the progressive conversion mode.
2D Progressive
This function is useful to display fast-moving images such as sports
and action films. Mode that optimizes the image in a displayed frame.
3D Progressive
This function is useful to display relatively slow-moving images such
as drama and documentary more clearly.
Mode that optimizes the image by estimating the movement of a
number of preceding and succeeding frames.
Film Mode
Reproduces the image of film software clearly. Displays the optimized
image of film transformed with three-two pull down enhancement to
progressive mode images.
MOUSE ADJ.
MOUSE ADJ.