Magnifying A Specific Portion Of An Image - Sharp Conference Series XG-V10WU Operation Manual

Magnifying a Specific Portion of an Image

On-screen Display
E-33
Projector
2
1
3
4
Remote Control
3
1.2.3 4.5.6
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position)
1 Press ENLARGE. Each time ENLARGE is
pressed, the image will be magnified.
2 When the image is magnified, you can pan and
scan around the image by using ∂/ƒ/ß/©.
• ENLARGE does not work with UXGA signal image.
• Each time ENLARGE is pressed, image
toggles as shown below.
1 4 9
• If the input signal is changed during digital image
magnification, the image will return to
is changed
(a) when INPUT 1.2.3 or INPUT 4.5.6 is pressed,
(b) when the input signal is interrupted, or
(c) when the input resolution and refresh rate changes.
3 To return to
1, press UNDO.
MOUSE ADJ.
magnification
16 36 64
1. The input signal