Troubleshooting - Sharp Aquos LC-20B6U Operation Manual

Liquid crystal television
Table of Contents

Advertisement

Troubleshooting

■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
LCD TV set
Problem
Picture
Sound
There is no
picture or
sound.
There is no
picture.
Picture
There is no
picture from
AV1 or AV-
IN2.
There is no
sound.
There is no
picture or
sound, just
noise.
Picture is
not clear.
Picture is
light or
improperly
tinted.
The picture
is too dark.
Remote control does not work.
The clock (AUTO CLOCK)
cannot be set.
Unit cannot be operated.
46
Check item
• Make sure the AC adapter is properly inserted in the
power outlet.
• Reception other than those of broadcasting stations can
be considered.
• Make sure the input mode is set to TV.
• Make sure the MAIN POWER switch of the main unit is
on.
• Make sure the BRIGHTNESS is properly adjusted.
• Fluorescent lamp may have reached the end of service
life.
• Make sure the S-VIDEO terminal has nothing connected.
• Make sure the AUDIO ONLY is not set to ON.
• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
• Make sure that headphones are not connected.
• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.
• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.
• Check color adjustment.
• Check COLOR SYSTEM setting.
• Press the BACKLIGHT button or set the BACKLIGHT or
BRIGHTNESS settings.
• Check CONTRAST and BRIGHTNESS adjustment.
• Fluorescent lamp may have reached the end of service
life.
• Check the batteries of the remote control.
• Make sure the remote sensor window is not under strong
lighting.
• The broadcasted EDS signal may be weak. Check the
antenna.
• Carry out EZ SETUP or Setting the CLOCK again.
• If EDS signal is not sent, set the clock using MANUAL
CLOCK Setting.
• External influences such as lightning, static electricity,
etc., may cause improper operation. In this case, operate
the unit after first turning the power off the LCD TV set,
or unplugging the AC cord and re-plugging it in after 1 or
2 minutes.
Reference page
10
17
17
23
48
44
36
18
18
11
9, 10
9, 10
23
28
22, 23
23
48
8
8
14-16, 26
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc-20b6us

Table of Contents