Antenna Connection; Removing The Terminal Cover - Sharp Aquos LC-20B6U Operation Manual

Liquid crystal television

Table of Contents

ANTENNAS

• The antenna requirements for good color television reception are more important than those for black & white television

reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various antenna systems.

1. A 75-ohm system is generally a round cable with F-type connector that can easily

be attached to a terminal without tools (not supplied).

2. A 300-ohm system is a flat "twin-lead" cable that can be attached to a 75-ohm

terminal through a 300/75-ohm adapter (not supplied).

OUTDOOR ANTENNA CONNECTION

• Use one of the following two diagrams if you connect an outdoor antenna.

A: Using a VHF/UHF combination outdoor antenna

B: Using separate VHF and/or UHF outdoor antennas

• Connect the outdoor antenna cable lead-in to ANT. (Antenna terminal) on the rear of the main unit.

NOTICE

F-type connector

75-ohm coaxial cable

■ Before connecting cables and cords to the rear terminals, remove the terminal covers. Push

in the tabs and pull out the terminal covers carefully.

■ To mount the cover, insert the 2 hooks on the bottom of the cover into the cabinet and press

on the upper part of the terminal cover until the tab locks in place with a click.