Connecting A Vcr, Dvd Player Or A Camcorder To Component1/Component2/Av1/Av-In2/Pc-In - Sharp Aquos LC-20B6U Operation Manual

Connecting External Devices (Continued)

Connecting a VCR, DVD Player or a Camcorder to COMPONENT1/COMPONENT2/AV1/AV-IN2/PC-IN

P
R
P
B
Y
Audio (L)
Audio (R)
DVD Player
• When connecting this type of external device,
select "COMPONENT2" on the COMP.2/AV1
SELECT of SETUP menu. (See page 28.)
ANote:
• If your VCR (or other external devices) has an S-video terminal, S-VIDEO connection is recommended. (Use an S-video cable.)
• When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select "AV1"), you can only view pictures from the
S-VIDEO terminal.
• You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting an external device, use
care to connect the video and audio cables to the corresponding terminals.
44
RGB cable (supplied)
ø 3.5 mm stereo minijack cable
(commercially available)
Video
Audio (L)
Audio (R)
Y
P
B
P
R
Audio (L)
Audio (R)
• When connecting these types of external devices, select "AV1"
on the COMP.2/AV1 SELECT of SETUP menu. (See page
28.)
PC
VCR
DVD Player
Video
Audio (L)
Audio (R)
Camcorder
S-Video
VCR