Table of Contents
Advertisement
GB
Hair Straightener With Wave
Attachments
Dear Buyer!
We congratulate you on having
bought the device under trade
name "Saturn". We are sure that
our devices will become essen-
tial and reliable assistance in
your housekeeping.
Avoid
extreme
changes.
Rapid
change (e.g. when the unit is
moved from freezing temperature
to a warm room) may cause con-
densation inside the unit and a
malfunction when it is switched
on. In this case leave the unit at
room temperature for at least 1.5
hours before switching it on.
If the unit has been in transit,
leave it indoors for at least 1.5
hours before starting operation.
DESCRIPTION
1.
Straightening plate
2.
Body
3.
Indicator light
4.
On/Off switch
5.
Handle
6.
Cord swivel protection
7.
Release plate button
8.
Big crimping plate
9.
Small crimping plate
IMPORTANT SAFEGUARDS
Please, read this instruction man-
ual carefully before use and keep it in
a safe place for future reference.
The hair crimper is for household
use only.
Before the first connection of the
temperature
temperature
appliance check that voltage, indicated
on the rating label, corresponds the
mains voltage in your home.
Always unplug the hair crimper
from the power supply when not in
use, attaching accessory parts and
before cleaning.
To protect against the risk of elec-
tric shock, do not immerse the appli-
ance in water or in any other liquids.
Do not take this appliance into a
bathroom or use near a water basin.
Keep away from children.
Do not leave the operating appli-
ance unattended.
Do not use other attachments
than those supplied.
Never carry or suspend the hair
crimper by the cord.
Do not operate after malfunction
or damage to cord.
To protect against the risk of
burn, do not touch the detachable
plates until they cool down.
Do not attempt to repair, adjust
or replace parts in the hair crimper.
Repair the malfunctioning appliance in
the nearest authorized service center
for a qualified examination and repair.
-Service life – 3 years. Before put-
ting into operation shelf life is un-
limited.
CAUTION:
The appliance is hot when in use.
INSTRUCTION FOR USE
Comb hair and fully unwind the
cord.
Establish the plate on the appli-
ance and pull downwards it, until it
clicks into proper position.
To remove the plate from the hair
crimper, press the release plate but-
ton, then pull upwards to remove it
from the attachment point.
Insert the plug into the power
supply.
Set the On/Off switch to "ON"
position,
thus
should light up. Allow the appliance to
heat a few minutes.
Divide your hair into locks, clamp
the lock between plates and fixing
such position during 1-2 minutes.
The set includes:
Straightening
-
straighten curly hair;
Crimping plates: wavy style.
-
Do not comb hair right after a
curling. Give it time to cool down.
When finished, set the On/Off
switch to "Off" position and unplug the
appliance from power supply.
3
the
indicator
light
plate:
allows
to
Advertisement
Table of Contents
