Shark LIGHT & EASY S3250W 11 Owner's Manual page 6

Getting Started
fig. 1
ATTACHING THE MICRO-FIBER PAD
1 Place the micro-fiber cleaning pad
on the floor with the quick fastener
strips facing up. Place the Light &
Easy™ Steam Mop on the top of the
pad to attach. (fig. 1)
IMPORTANT: Only add water to
the tank. Chemicals or cleaning
solutions may be unsafe or cause
damage.
4 TOLL FREE: 1-800-798-7398
S3250W_11_IB_ENG_100505.indd 4-5
Your micro-fiber cleaning
pads should be replaced
every 3 months to maximize
cleaning performance.
Replacement micro-fiber pads are
available at www.sharkclean.com or
by calling 1-800-798-7398.
FILLING THE WATER TANK
IMPORTANT: Unplug the Light &
Easy™ Steam Mop before filling the
water tank with water. (fig. 2)
1
Remove the water tank cap by
turning it counter-clockwise to the
unlocked position. (fig. 3)
fig. 2
fig. 3
2 A filling flask and funnel are included
with your Light & Easy™ Steam Mop
to make filling the water tank easy.
Fill the flask with water and use the
funnel to pour it into the tank. Keep
the water level under the "MAX" fILL
line. (fig. 3)
3 Replace the water tank cap and turn
it clockwise to the locked position.
www.sharkclean.com
English
5
10-05-05 4:14 PM