Deleting A File - Casio WK-3300 User Manual

Saving Data
7
Use the [ ] and [ ] CURSOR buttons or [+] and
[–] buttons to select the name of the file you want
to rename.
• You could also use the number buttons to input a
three-digit file number. The file number is shown in
the number area of the display.
8
Press the [ ] CURSOR button to advance to the
file name input screen.
• Use the [+] and [–] buttons to scroll through letters at
the current cursor location. See the page E-94 for
information about inputting text.
• Use the [ ] and [ ] CURSOR buttons to move the
cursor left and right.
9
After inputting the file name, press the [ ] CURSOR
button.
• This will display a confirmation message asking
whether you really want to change the name.
0
Press the YES button to change the file name.
• This will cause the message "Pls Wait" to appear on
the display to indicate that a card access operation is
being performed. Never try to perform any other
operation on the keyboard while the card is being
accessed. The message "Complete" will appear on the
display after renaming is complete. After a few
seconds, the message will be replaced by the file name
selection screen.
• If you do not want to continue with file renaming,
press the EXIT button or the NO button in response
to the above confirmation message. This will return
you to the file selection screen.
A
After you are finished performing the rename
operation, press the DISK/CARD button (CARD
button on the WK-3300/WK-8000) to exit the Card
Mode.
E-92

Deleting a File

You can perform the procedure in this section to delete a file
from external storage media.
IMPORTANT!
• Note that the file delete operation cannot be undone.
Make sure that you no longer need data before you
delete it.
• Deleting a file causes all of the file numbers following it
to be reduced by one. If you plan to delete another file,
make sure that you do not specify the wrong file number.
PREPARATION
• SD Memory Card
• Insert the SD memory card that contains the file you
want to delete into the keyboard's card slot. Make sure
that the write-protect switch of the memory card is not
in the write-protect position.
• Floppy Diskette (WK-3800 Only)
• Insert the floppy diskette that contains the file you want
to delete into the keyboard's floppy disk drive. Make
sure that the diskette's write protect hole is closed,
which enables writing.
To delete a file from external storage media
1
What you should do first depends on the type of
external storage media you are using.
• SD Memory Card
On the WK-3800, press the DISK/CARD button twice.
On the WK-3300/WK-8000, press the CARD button
once.
• This causes the CARD indicator (the DISK/CARD
indicator on WK-3800) to appear on the display, and
also displays "Card" in the display's text area.
• Floppy Diskette (WK-3800 Only)
Press the DISK/CARD button.
• This causes the DISK/CARD indicator to appear
on the display, and also displays "Disk" in the
display's text area.
NOTE
• After pressing the DISK/CARD button (WK-3300/WK-
8000: CARD button) once, you can use the [ ] and [ ]
CURSOR buttons to select the external storage media.
2
Press the [ ] CURSOR button to display the Card
Mode (or Disk Mode) menu.
3
Use the [ ] and [ ] CURSOR buttons to display
the "Delete" screen.