Casio WK-3300 User Manual page 51

I Vibrato Waveform (Range: See below.)
Specifies the vibrato waveform.
V i b . T
Value Meaning
Sin Sine Wave
tri Triangle Wave
SAU Sawtooth Wave
Sqr Square Wave
I Vibrato Delay (Range: –64 to 00 to +63)
Specifies the amount of time before vibrato starts.
V i b D e l a
I Vibrato Rate (Range: –64 to 00 to +63)
Rate (speed) of the vibrato effect
V i b . R
I Vibrato Depth (Range: –64 to 00 to +63)
Depth of the vibrato effect
V i b D
I Octave Shift (Range: –2 to 0 to +2)
Up/down octave shift
O c t S h i f t
I Level (Range: 000 to 127)
This parameter controls the overall volume of the tone. The
greater the value, the greater the volume. Setting a level of
zero means that the tone does not sound at all.
L e v e l
e
y p
Waveform
y
a t e
e t h
p
I Touch Sensitivity (Range: –64 to 00 to +63)
This parameter controls changes in the volume of the tone in
accordance with the pressure applied to the keyboard keys. A
greater positive value increases the volume of the output as
pressure increases, while a negative value decreases volume
with increased keyboard pressure. A setting of zero specifies
no change in output volume in accordance with keyboard
pressure.
T c h S e
I Reverb Send (Range: 000 to 127)
This parameter adjusts reverb.
R v b S e n d
I Chorus Send (Range: 000 to 127)
This parameter adjusts chorus.
C h o S e n d
I DSP Line (Settings: on, oFF)
This parameter controls whether or not the DSP effect is used.
DS P L i n e
Synthesizer Mode
n s e
E-49