Registration Memory; Registration Memory Features - Casio WK-3300 User Manual

Registration Memory

Registration Memory Features

Registration memory lets you store up to 32 keyboard setups
(4 sets × 8 banks) for instant recall whenever you need them.
The following is a list of settings that are saved in registration
memory.
Registration Memory Settings
• Tone
• Rhythm
• Tempo
• Layer on/off
• Split on/off
• Split point
• Auto Harmonize on/off
• Mixer settings (Channels 1 to 10)
• Effect settings
• Touch Response settings
• Assignable jack setting
• Transpose
• Tuning
• Accompaniment volume setting
• Pitch bend range
• Auto Harmonize type
• MODE button setting
• Synchro standby state
• Mixer Hold
• DSP Hold
• Synthesizer Mode parameters (Modulation Assign,
Modulation Depth, Vibrato Waveform, Vibrato Delay,
Vibrato Rate, and Vibrato Depth only)
NOTE
• Each bank of registration memory initially contains data
when you first use the keyboard. Simple replace the
existing data with your own data.
• Registration memory functions are disabled while you
are using the SMF Player, Song Memory or demo tune
function.
• Registration memory functions are also disabled while
you are using the floppy disk drive (WK-3800 only) or
card slot (page E-83).
Setup Names
You can assign setups into one of 32 areas, which you can
select using BANK buttons 1 through 4 and the four
REGISTRATION buttons. Area names range from 1-1 through
8-4 as shown below.
1
BANK 1 1-1
BANK 2 2-1
BANK 3 3-1
BANK 4 4-1
BANK 5 5-1
BANK 6 6-1
BANK 7 7-1
BANK 8 8-1
Use the BANK button to select the bank. Each press of
BANK cycles through the bank numbers from 1 to 8.
Pressing one of the REGISTRATION buttons (1 to 4) selects
the corresponding area in the currently selected bank.
NOTE
• Whenever you save a setup and assign it a setup name,
any setup data previously assigned to that name is
replaced with the new data.
• You can use the keyboard's USB capabilities to save
your setup data to a computer or other external storage
device. See "Internet Data Expansion System" on page
E-82 for details.
• You can save setup data to external media, if you want.
See "Saving Data" on page E-83 for more information.
2 3 4
1-2 1-3 1-4
2-2 2-3 2-4
3-2 3-3 3-4
4-2 4-3 4-4
5-2 5-3 5-4
6-2 6-3 6-4
7-2 7-3 7-4
8-2 8-3 8-4
E-51