Philips QG3340 User Manual page 15

Problem
The beard
comb does
not stay
attached to
the handle.
The appliance
does not
work
anymore.
The appliance
does not
work when it
is connected
to the mains.
Possible
cause
You do not
attach the
beard comb
correctly.
The guiding
grooves are
dirty.
The comb is
broken.
The
rechargeable
battery is
empty.
The
appliance is
not designed
to work from
the mains.
Solution
Slide the beard comb into the guiding
grooves on both sides of the handle
until you hear a click.
Clean the appliance and the guiding
grooves thoroughly.
Go to your Philips dealer or contact
a Philips service centre to purchase a
new comb.
Charge the appliance (see chapter
'Charging'). Make sure you switch off
the appliance before you charge it.
During charging, the charging light on
is a power failure or if the wall socket
is live. If there is no power failure and
the wall socket is live but the charging
appliance to your dealer or a Philips
service centre.
Switch off the appliance and charge it
for 10 hours (see chapter 'Charging').
ENGLISH
15