Advertisement
All manuals and user guides at all-guides.com
UP308BH (DSS2465) ENG OM
12/28/04
Command
Function
then
Repeat a Message*
then
Playing incoming Messages
then
Skipping a Message
then
Deleting a Message
then
Stop Operation
* For Repeat a Message function, press # then
repeat the previous message, or press # then
repeat the current message.
** For Memo Record and Greeting Message Record function, the first time you enter
the corresponding command, it starts the Recording function. If you want to stop
the recording, press
then
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this
time from the chart above.
6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Remote access with the handset
You can check your new incoming messages, skip, repeat, or delete your incoming
messages with the handset. For example, you can install the answering system in the
living room, and check your incoming message from a bedroom with the handset.
You can also use speakerphone on the handset for remote operation (see "Making and
receiving calls" on page 23).
• If you press
before the answering system answers, the phone will return to standby.
• When the answering system does not answer within 6 seconds, you hear a beep and the
phone will return to standby.
• The base's keypad is disabled during remote operation.
• When you receive a call, the remote operation is canceled.
• You can change the handset volume during a remote operation.
• During the remote operation "
8:27 AM
Page 53
Command
Function
then
Answering System On
then
Memo Record/Stop **
then
Greeting Message Record/Stop **
then
Answer System Off
then
Help Guidance
within about four seconds to
after about four seconds to
or
.
" appears on the base.
[ 53 ]
Advertisement
